So far, no luck. It still hangs up. My Icom is set up on COM1 using a CT-17 interface so my PTT is on COM2 through a rigblaster interface. I tried playing with different settings but to no avail. Something in the program wants to keep the DTR or RTS high for some reason.
Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -----Original Message----- From: STAN1ZX [mailto:[EMAIL PROTECTED] Sent: Saturday, May 22, 2004 18:08 To: [EMAIL PROTECTED] Subject: Re: [Dx4win] PSK31 PTT stuck on TX in File>preferences, check the Radio for type, address, baud rate, comport. check DTR, RTS Next open the psk31 screen and right click on the bottom of the screen and go to <settings> in settings click on TX and set <PTT> to CW Interface and click keyline <DTR> try that and see if it helps 73 STAN N 1 Z X PGP Version:8.0.2 Fingerprint 9543 35A9 8343 F5AA 6353 83BB 6D1E BE23 3D44 7F2C Scanned by Norton Anti Virus System Any Sufficiently Advanced Technology is Indistinguishable from Magic" ---Arthur C. Clarke ----- Original Message ----- From: "Jay Hainline" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, May 22, 2004 1:58 PM Subject: RE: [Dx4win] PSK31 PTT stuck on TX nope, that doesn't work. The psk31 transmission ends but the radio stays keyed. Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -----Original Message----- From: STAN1ZX [mailto:[EMAIL PROTECTED] Sent: Saturday, May 22, 2004 17:49 To: [EMAIL PROTECTED] Cc: N.1.Z.X. Subject: Re: [Dx4win] PSK31 PTT stuck on TX I am not having that problem with the TX being stuck. a couple of things though are you manually clicking on the TX to turn on the Transmitter ? or are you sending from a macro ? if you are running from a macro, you have to include the turn off signal at the end and if you are clicking on TX, it may also require you to unclick, Just a thought 73 STAN N 1 Z X PGP Version:8.0.2 Fingerprint 9543 35A9 8343 F5AA 6353 83BB 6D1E BE23 3D44 7F2C Scanned by Norton Anti Virus System Any Sufficiently Advanced Technology is Indistinguishable from Magic" ---Arthur C. Clarke ----- Original Message ----- From: "Jay Hainline" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, May 22, 2004 12:15 PM Subject: RE: [Dx4win] PSK31 PTT stuck on TX I have the same problem here Jose. I posted to the reflector the other day but have not received a response back from anyone. I am able to run psk31 using vox but it is not the preferred way for me. Obviously the DTR and RTS are staying high once transmit is started. I have tried switching to either one with no success in the psk31 settings window. There was no problem in version 5.03. 73 Jay Jay Hainline KA9CFD EN40om Colchester, IL [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jose Ng Lee Sent: Saturday, May 22, 2004 15:51 To: [email protected] Subject: [Dx4win] PSK31 PTT stuck on TX Hi, I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1. My problem with version 6.03 is that after ending the PSK31 transmission the PTT is stuck in TX and doesn't go back to RX. I tried the same setting on old version 5.03 and PSK31 works fine. Also, tried another PSK31 software WINPSKse and PTT TX/RX works fine. Is anyone else experiencing the same PSK31 PTT stuck on TX problem? Thanks, JOSE / HP2CWB _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
