Hi Guys, We are talking about PSK31 and here is what I noticed:
I'm running a rig IC-745 without RS232 connection ( an old rig with an old operator hihi ) so... band and mode is changed as necessary manually. With packet connected and spots displaying in DXspots window the must recent spot we can see it reflected in the main log in MODE and BAND .This is ok BUT with PSK31 running and click a call it is transferred to main log. PSK31 mode is displayed BUT BAND is not the correct or the same I have selected for the operation. I notice the band is always the same of the must recent spot on DXspot window. I know .. I can select the band and log the qso but next contact the band change again to the DXspot band and need to correct the band again and again etc... This happen ONLY with PSK-31 it NOT happen with CW SSB or RTTY ( tks SIR...) See you Bob in next one... hi 73 from Jose, CT1AOZ [EMAIL PROTECTED] ----- Original Message ----- From: "Bob Stewart" <[EMAIL PROTECTED]> To: "WC7N" <[EMAIL PROTECTED]>; "DX4WIN Group" <dx4win@mailman.qth.net> Sent: Monday, May 31, 2004 1:35 AM Subject: Re: [Dx4win] PSK-31 & 6.03 > Hi All, > > I have the same problem with 6.03 and PK31 exactly as reported below by > WC7N. > > In addition I am also experiencing a problem entering the RX call sign into > DX4WIN as reported by Stan N1ZX and John K2CIB. > > I am running WIN XP - looks like there is a PSK31 problem with version 6.03 > > Bob ZL2AMI > > > > OK let me see if I can explain my problem. > > > > When I open the PSK window and hit the xmt key it stays locked up. If I > > close the window it then unlocks and if I then re open the PSK window and > go > > to settings/xmt and change the setting from DTR to RTS it will then > operate > > fine until I close the window and reopen it and then it will lock up on > xmt. > > If as soon as I re open the window I change if from RTS back to DTR it > will > > work fine until I close the window and when I reopen it will hang up > unless > > I first change it back to either RTS or DTR. > > > > Now it should be in DTR. I went back to 5.03, last time we were able to > use > > a separate port for PSK, and it works fine as is and is set on DTR. > > > > Know some have had problems with lock up on PSK and searched the archives > > but did not find a solution. > > > > Maybe someone has the answer for me. > > > > Rod WC7N > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
