Like Joe said, you have to use two ports. Run the second one to the RigBlasterPro B interface. If you define the second port with MMTTY (or MixW), you can use FSK, if your rig supports it. BTW, you must use a real port, not a USB derived one (with only one known exception), for successful FSK.
John, K2CIB ----- Original Message ----- From: "Joe Stepansky" <[EMAIL PROTECTED]> To: <dx4win@mailman.qth.net> Sent: Sunday, November 07, 2004 2:16 PM Subject: [Dx4win] Using Rigblaster for CW/RTTY > I've been through the manual and can't figure this out. I've successfully > configured DX4WIN for CW keying using my Rigblaster Pro. However, when > trying to set up RTTY, which is also on COM1, the software refuses to open > the RTTY window, saying COM1 is already in use. Similarly, when I can use > MMTTY successfully when DX4WIN is closed, but I get a COM1 error message > if DX4WIN is open. > > Guess I can get rid of CW keying if necessary, but is anyone using DX4WIN > with a Rigblaster for both CW and RTTY? Or is there some other way to > interface something like MMTTY with DX4WIN? > > 73, Joe KQ3F > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >