--- Hamad 9K2HN <[EMAIL PROTECTED]> wrote: > I have just generated my WPX award report and I noticed a strange > column labeled with "D" and the letter listed under for some contacts > is not the common we know (W, C, M and S)it is D also..... if I double > clicked on it to view the qso's I get an error message saying "Please > select a mode or a band"... any one having the same problem?
I think there are "deleted" prefixes just like there are deleted entities. You can find more info on the award at: http://www.cq-amateur-radio.com/cqworldwidewpxawards.html "Only current prefixes will be counted toward the WPX Honor Roll standings. A list of prefixes to be removed from the Honor Roll is available from the WPX Award Manager for an SASE. Prefixes will be deleted from the Honor Roll listing two years after they are no longer authorized for use by the governing authority or by the ITU." There is a list of deleted prefixes in the DX4WIN directory (maybe the SAVE directory). 73 - Jim AD1C ===== Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC From [EMAIL PROTECTED] Wed Sep 15 10:42:57 2004 From: [EMAIL PROTECTED] (NABEREZNY JOHN) Date: Wed Sep 15 15:32:09 2004 Subject: [Dx4win] QSLing Message-ID: <[EMAIL PROTECTED]> Hi Folks, I have a question regarding printing cards, but done in such a way as to confirm each band/each mode contacts on a single card. I am doing this as there are so many cards to be sent out to the bureau that I prefer to send them out direct to the bureaus rather than going to ARRL. I am working in a 90k qso data base. First of all I have two logs that are combined for K2SIG and WE2F that have to be split by dates. Once I have one main log, and two separate logs, I would like to split out from the separate logs ..lets say all the German QSO's, now print, on one card, all those tagged qso's but printing each qso , but only each band/ mode qso. When complete, I would like to reset all the German tags to No, then merge this modified log back into the log from where it came, then merge the two logs back into the one main log, and return it to active duty. The only reason I keep a combined log is award /dxcc purposes. First can it be done, and secondly can you step me through it. 73, John WE2F From [EMAIL PROTECTED] Wed Sep 15 22:33:53 2004 From: [EMAIL PROTECTED] (Ken Kopp - KOPP) Date: Wed Sep 15 22:39:39 2004 Subject: [Dx4win] Call sign look-up Message-ID: <[EMAIL PROTECTED]> Hello all, I've just upgraded from 6.02 to 6.03 and all appears to be OK, except ... I have the Buckmaster CD data loaded onto my hard drive, and the call look-up feature worked/works OK in the 6.02 version, but doesn't display an entered call in the 6.03 version. Am I missing something that's most likely totally obvious? 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED] From [EMAIL PROTECTED] Thu Sep 16 04:51:38 2004 From: [EMAIL PROTECTED] (Garry Shapiro) Date: Thu Sep 16 04:56:45 2004 Subject: [Dx4win] QSL printing Message-ID: <[EMAIL PROTECTED]> I have been a DX4WIN user for years, and have logged many thousands of QSO's with it. However, until now, I have never attempted to print QSL labels with the program. I am, in fact, more than four years behind in QSLing.:-( It's time to catch up! I am using ver. 6.03 Since one must start somewhere, I have chosen as simple a starting point as possible--a single contest log (2003 CQP) imported from Writelog. There are only 44 QSL's to 32 individual stations to be printed, and all are direct. I wish to print both QSL labels and mailing labels. All QSO's appeared correctly in the Print Preview, but there were two problems. The first problem encountered was a non-WYSIWYG printer, whose page image is a bit small. Not knowing how to adjust focus on an HP G95, I have compensated for this by use of the Custom1 label selection, modifying horizontal and vertical pitch of an Avery 5160 label to slightly expand the page image. (If there is a better method, I would like to know it.) The second problem is the reason for this message--I am not getting mailing labels. Since all the QSL's are in response to direct mail--no managers--I have entered each station callsign into the QSL Manager box in the QSO window for each QSO, and I have checked Print QSL Managers in the Intermediate Print Window. I think the problem lies with my databases. I am using GOWIN Issue 286 and a several year-old version of RAC,loaded on the hard drive. These display results when the QSO window is active and F3 is pressed---but the display is weird. Three windows come up: a GOWIN window with the data, a black DX4WIN window under it--and a duplicate GOWIN window under that! Closing the black DX4WIN window also closes the second GOWIN window; closing the top GOWIN window closes all three. The entries in the DX4WIN Preferences/Ext Data window are: Data source: Flying Horse CD ROM Data directory: C:\RAC QSL Manager Search/EXE Executable Program:C:\Golist\GoWin.exe Enabeled box: checked I would appreciate some help here. Are RAC, GoWin or both damaged, or is there another issue? Garry, NI6T See you in the California QSO Party (CQP) Oct 2-3
