--- J ALBU <[EMAIL PROTECTED]> wrote: > sending a spot in Split it only send VFO A freq. I need to introduce the > split freq by hand. > > But clicking in a spot with a split frequency it goes nicely both vfo's mode > etc..
Hi Jose, This is a problem across all ICOM radios. When the computer reads the radio info, it can not tell that the radio is in SPLIT mode. So with ICOM radios, you will have to type the QSX frequency in by hand. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sat Apr 23 18:21:18 2005 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Sat Apr 23 18:27:09 2005 Subject: [Dx4win] CW Interface - Problem detected Message-ID: <[EMAIL PROTECTED]> Hello. I would appreciate a help on this : I am using DX4WIN 6.03 in a desktop Pentium computer under windows 98. I use the CW keyer interface thru LPT1 port without any problem in this computer. I am preparing myself for a Dxpedition next month. I have copied the whole DX4WIN directory to a Toshiba notebook (Pentium 4 under windows XP, no serial ports but has LPT1). So far so good. Everything works fine. However when I attempt to use the Keyer by configuring LPT1 in Preferences|Control . I receive a message: Cannot find LPT1 for keying, when leaving he preferences program. However LPT1 is there and works with other software installed in the notebook computer. BTW the only program running in the notebook is the DX4WIN. Also, I have tried the following: I have not configured the CW interface (none on the port). I have configured the Band Encoder instead. I have assigned LPT1 for the band dencoder. No message is printed when leaving the preferences program. Any help is welcome. Thanks FRED CARVALHO ? PY2XB
