I'm using the Rigblaster PRO as my interface. When I go into FSK mode, all it does is key the xmtr, no diddles.
Same setup works FB with MMTTY as a standalone. When I go to the configure page of MMTTY (running under DX4WIN) .. I don't see any FSK related choices.. that is, which comm port has the TXD info on it, etc. I do see the option for Comm TXD under the MISC tab.. but no place to designate which Comm port has the TXD info. I tried copying the .INI file over to the DX4WIN folder.. and that didn't work either. When I bring up the standalone version, I get the drop down window under setup:TX to which selects the PTT (and FSK) comm port.. but when running under DX4WIN, it isn't there. So.. I'm stumped. -----Original Message----- From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Sent: Saturday, August 13, 2005 10:42 AM To: [EMAIL PROTECTED]; [email protected]; [EMAIL PROTECTED]; " <[email protected]>"@mailman.qth.net Subject: Re: [Dx4win] DX4WIN MMTTY and FSK ? At 11:12 AM 8/13/2005, [EMAIL PROTECTED] wrote: >DX4WIN MMTTY and FSK ? > >I've never received any feedback on how to set this up. > >I'm beginning to think it's not possible. > >Is ANYBODY out there running FSK with MMTTY/DX4WIN? I can't say anything more than "it works for me". I do have rig control and FSK on separate serial ports. Was working in MMTTY, and "just works" in DX4WIN. I didn't have to do anything special. -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
