Hi Radi ! Tnx for answer. Yes of cause BV7 its good program for management and printing QSL's. But for tracking awards I need also QSL status in Dx4win! By the way I'm printing on QSL's with already pre-printed QSO data fields - printing very GOOD.(I'm using HP LaserJet 6L)
-----Original Message----- From: Radivoj KAR [mailto:[EMAIL PROTECTED] Sent: Monday, August 29, 2005 1:22 PM To: 'Dimitriy Borzenko'; [email protected] Subject: RE: [Dx4win] BV7 and dx4win Hi, I found it is better to set QSL received flags in DX4WIN, export into BV7 and do QSL printing from there. I haven't tried to do what you have been doing, so don't know if the same error message would appear after re-importing into DX4WIN. I do all my QSL management in BV7, it's a great program for this. The only limitation is that it is too difficult to set-up printing directly to QSL cards if one has them with already pre-printed QSO data fields.. 73, Radi F6GNZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dimitriy Borzenko Sent: Friday, August 26, 2005 11:46 PM To: [email protected] Subject: [Dx4win] BV7 and dx4win Hello list. Anybody have experience with BV7? 1. I'm exporting my Dx4win log to ADIF for BV7 2. Printing on QSL's and mark QSO's - QSL received. 3. Export from BV7 to ADIF 4. From Dx4win importing ADIF file with option "Imported QSO sets Conf. flag" I got message "2259 confirmed QSOs were not found in the log" - why ? Best regards de 4z5cp _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
