Jorge, See if your sound card has a set of pins that you can push on the connector that presently goes to your PC's internal speaker. Some do, but many do not. If it has two inputs for more than one CD-Rom drive, you can also use one of these if one is still available, and not being used, but you must use a swamping resistor to limit the input to the sound card to near line level vs.the PC speaker level. That's the only way, as the software just talks to the PC speaker circuitry as designed, likely with the assumption that you can still use it without a sound card and to make it work without any added hardware requirements. 73, -=Rog-K9RB=-
----- Original Message ----- From: "Jorge Garc?a" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, January 27, 2005 9:28 AM Subject: [Dx4win] cw announce > > Dr. Paul, in ver. 6.04 spots CW announce still through the small speaker of > the computer?Let me know if there are a solutiontnx es 73,jorge > garcia/EA8ASE > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
