I have an Epson Stylus C84 which is probably similar to your C42. I can print report info on the rear of my cards in landscape mode with no problems using 6.03. I can send you the custom label parameters I use if you want.
73, Floyd - K8AC ----- Original Message ----- From: "Franki ON5ZO" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 31, 2005 3:38 AM Subject: [Dx4win] QSL label definitions / direct QSL printing Hello I have a question regarding QSL label definitions. I have two custom definitions for two kinds of labels, but each time I do an upgrade, I have to re-enter the label parameters. After an upgrade, I copy the entire "save" folder to the new version's folder, but label definitions seem to be stored elsewhere, or am I missing something? I know, it doesn't take more than a couple of minutes to write down the parameters from the old DX4WIN and insert them into the new version, but still... I'd like to know where these are stored. Another issue: I never got down to printing QSLs directly, i.e. without a label but straight on the cards. I did try it once, with my Brother HL-5030 laser printer, but as far as I remember, I had to rotate the cards 90? because the dimensions of a QSL would not allow the standard feeding method. But rotating the cards in the paper tray by 90? also meant printing in 'landscape' from DX4WIN, which didn't work and was reported as a bug a few months later. Is it correct that this should work properly now, and has anyone successfully printed QSL cards with this type and brand of laser printer? I also have an Epson Stylus C42 inkjet, I assume it will be easier to use this one. Can anyone tell me in a nutshell how to configure DX4WIN to use this printer? All input greatly appreciated! 73 Franki ON5ZO _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
