Trying to import an adif report from the arrl Lotw, the first time i did
this everything checked out fine and Dx4win tracks my Lotw stuff excellent, now
i am trying to update my latest confirmations following the same instructions
as i did the first time, i have my adif reports from the arrl which i have
opened and confirm they are all there 100% but my problem is Dx4win won't read
them when i try to import? Using Imported QSO sets Upload Confirmed Flag !
Is there anything i may have overlooked?
Strange as it worked fine originally anyone have any suggestions?
MM0EAX
From [EMAIL PROTECTED] Wed Jul 27 17:58:22 2005
From: [EMAIL PROTECTED] ([EMAIL PROTECTED])
Date: Wed Jul 27 17:58:06 2005
Subject: [Dx4win] Adif import
Message-ID: <[EMAIL PROTECTED]>
After some head scratching i appear to have loaded the new adif in, In
prefrences/qso i had the "Upload Conf" selected while i was trying to import
the
adif with no luck i changed this prefrence to "Card or Upload" and Dx4win
accepted it!
Is this normal? i would have thought it really shouldnt make any diffrence
what i had selected.
MM0EAX
From [EMAIL PROTECTED] Thu Jul 28 09:58:20 2005
From: [EMAIL PROTECTED] (ANDREW HEWITT)
Date: Thu Jul 28 09:58:03 2005
Subject: [Dx4win] Function Keys
Message-ID: <[EMAIL PROTECTED]>
Can somebody please tell me where I can find a list of the control characters
%A to %Z? I want to program a keyso that I can repeat a CQ call automatically
with a pause between each. This is to use as a interupptible beacon on 6m in
Mexico.
73
Andy G3SVD (temp /XE1)
From [EMAIL PROTECTED] Thu Jul 28 15:24:09 2005
From: [EMAIL PROTECTED] (Richard Zalewski)
Date: Thu Jul 28 15:24:15 2005
Subject: [Dx4win] Did It Again!
Message-ID: <[EMAIL PROTECTED]>
I just finished a QSO with a local. Went to log it. Got the question do you
want to save it answered yes and overwrote a QSO I had yesterday with an FO.
I still can't figure out why after you enter the Q you have to then save it.
Why doesn't it save with the enter. And, there has to be a better way to
enter in a Q in the window that would prevent me from doing what I just did.
--
Tnx es 73
Dick W7ZR
From [EMAIL PROTECTED] Thu Jul 28 15:41:27 2005
From: [EMAIL PROTECTED] (Sauvageot Christoph)
Date: Thu Jul 28 15:41:56 2005
Subject: AW: [Dx4win] Did It Again!
Message-ID: <[EMAIL PROTECTED]>
That's a human error !!
Normaly DX4WIN don't ask if you fill a new QSO !!
Only in case you make changes on a stored QSO - then DX4WIN ask you - and you
give yes - its done - this is OK - or who many time DX4WIN should ask ?
Sorry for you
73 chris
-----Urspr?ngliche Nachricht-----
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Richard Zalewski
Gesendet: Donnerstag, 28. Juli 2005 21:24
An: REFLECTOR dx4win
Betreff: [Dx4win] Did It Again!
I just finished a QSO with a local. Went to log it. Got the question do you
want to save it answered yes and overwrote a QSO I had yesterday with an FO.
I still can't figure out why after you enter the Q you have to then save it.
Why doesn't it save with the enter. And, there has to be a better way to
enter in a Q in the window that would prevent me from doing what I just did.
--
Tnx es 73
Dick W7ZR
_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win
From [EMAIL PROTECTED] Thu Jul 28 16:01:22 2005
From: [EMAIL PROTECTED] (Juha Rantanen)
Date: Thu Jul 28 16:01:17 2005
Subject: [Dx4win] VUCC counting still wrong
Message-ID: <[EMAIL PROTECTED]>
VUCC grid square counting is still wrong in 7.04. If the grid setting is
set to 6 characters Dx4win calculates different squares by 6 characters
eventhough it should calculate them by first 4 chars.
Paul, could you fix this one for the next release?
Juha OH6XX
From [EMAIL PROTECTED] Thu Jul 28 16:06:37 2005
From: [EMAIL PROTECTED] (Juha Rantanen)
Date: Thu Jul 28 16:06:16 2005
Subject: [Dx4win] VUCC counting still wrong
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Juha Rantanen wrote:
> VUCC grid square counting is still wrong in 7.04. If the grid setting is
> set to 6 characters Dx4win calculates different squares by 6 characters
> eventhough it should calculate them by first 4 chars.
The version is 7.01 of course.
Juha OH6XX
From [EMAIL PROTECTED] Thu Jul 28 16:08:08 2005
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Thu Jul 28 16:07:51 2005
Subject: [Dx4win] Did It Again!
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
--- Richard Zalewski <[EMAIL PROTECTED]> wrote:
> I just finished a QSO with a local. Went to log it. Got the question do you
> want to save it answered yes and overwrote a QSO I had yesterday with an FO.
> I still can't figure out why after you enter the Q you have to then save it.
> Why doesn't it save with the enter. And, there has to be a better way to
> enter in a Q in the window that would prevent me from doing what I just did.
F9 starts logging QSOs. When you hit ENTER, the QSO is saved, and you get a
clean slate for the next QSO.
What you describe is over-writing an existing QSO. Always use F9 to start
logging a new QSO if you are not sure where you are.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Thu Jul 28 17:59:16 2005
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Thu Jul 28 17:59:03 2005
Subject: [Dx4win] Did It Again!
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
--- Richard Zalewski <[EMAIL PROTECTED]> wrote:
> Thanks guys, yes I realize I made the mistake. But again after I hit enter
> it tells me the log is "modified" and does its countdown and when it is done
> it still says it is "modified" but to my understanding it is not saved
> unless you do an <alt><s> or answer yes on exit of the program. This leaves
> a hole for error as I understand it.
Once the timer turns black, there is a backup of the log on the hard disk. If
DX4WIN crashes, when you restart it will prompt you to recover the backed-up
log. The only time you are truly vulnerable is when the backup timer is RED.
Do not walk away from the computer without saving your log first (ALT-S).
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Fri Jul 29 09:23:21 2005
From: [EMAIL PROTECTED] (Bob Naumann - W5OV)
Date: Fri Jul 29 09:22:49 2005
Subject: [Dx4win] Kenwood TS480 support?
Message-ID: <[EMAIL PROTECTED]>
I have searched the archives back 2 years, and I saw two questions regarding
Kenwood TS-480 support but no answers.
Has someone gotten the 480 working with DX4WIN ?
73,
Bob W5OV (ex N5NJ)
From [EMAIL PROTECTED] Thu Jul 28 10:18:46 2005
From: [EMAIL PROTECTED] (SV1DPI)
Date: Fri Jul 29 09:49:11 2005
Subject: [Dx4win] Function Keys
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Search for macros or
Alt+k to go on cw keyboard
Right click on cw keyboard
Help
Press %macros
...but I don't think there is a control character to repeat the cq after
some seconds
73 Kostas SV1DPI
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ANDREW HEWITT
Sent: Thursday, July 28, 2005 4:58 PM
To: DX4win
Subject: [Dx4win] Function Keys
Can somebody please tell me where I can find a list of the control
characters %A to %Z? I want to program a keyso that I can repeat a CQ
call automatically with a pause between each. This is to use as a
interupptible beacon on 6m in Mexico. 73 Andy G3SVD (temp /XE1)
_______________________________________________
Dx4win mailing list
[email protected] http://mailman.qth.net/mailman/listinfo/dx4win
