I have been using the "Flying Horse" for years and am happy with it. If I need to, I can access QRZ or Buckmaster on-line.
You do not need to pay "retail", there are other places to get it. I know GOLIST is one, another might be Bob Nadolny, WB2YQH. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Tue Oct 11 16:58:56 2005 From: [EMAIL PROTECTED] (Alan Zack) Date: Tue Oct 11 16:59:19 2005 Subject: [Dx4win] F3 UPDATE Button Message-ID: <[EMAIL PROTECTED]> I used CTWin for the recent CA QSO Party (CQP). I converted my CT Bin file to an ADIF file using the CT c2a utility then imported the contest log to DX4WIN. In looking at my new entries I discovered some of the CA County names did not get transferred over. For some reason they were not all included in the .adi files import. This is a separate issue with CT. Having done the above, I then wished to update my DX4WIN log with the CA County logged. I opened the F3 window and for each and every CQP QSO I clicked on the UPDATE QSO button in the F3 window. Is there a way to do this automatically for each new QSO logged or imported? Having to click on UPDATE QSO in the F3 window several hundred times after importing a state QSO party log is kind of a pain. To make it worse I discovered DX4WIN was not saving the changes made by pressing the UPDATE QSO button. I would click the UPDATE QSO button, DX4WIN would fill in the info, then I would click on the slider to go to the next QSO. But the changes I just made were not saved. Even by pressing F10 after each change they were not saved. the only way I could save them was to push UPDATE QSO the hit ENTER. DX4WIN would ask me if I wanted to save the changes, I would say yes, then it would save the changes and go to the next QSO. This is quite an involved, time taking process. Is there a way to make it quicker? TIA & 73 From [EMAIL PROTECTED] Tue Oct 11 17:09:15 2005 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Tue Oct 11 17:09:24 2005 Subject: [Dx4win] F3 UPDATE Button In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- Alan Zack <[EMAIL PROTECTED]> wrote: > I used CTWin for the recent CA QSO Party (CQP). I converted my CT Bin file > to an ADIF file using the CT c2a utility then imported the contest log to > DX4WIN. > > In looking at my new entries I discovered some of the CA County names did not > get transferred over. For some reason they were not all included in the .adi > files import. This is a separate issue with CT. The latest version of C2A should have exported the CA counties correctly. If it did NOT, contact me off-line and we'll fix it. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Oct 12 07:58:54 2005 From: [EMAIL PROTECTED] (Larry Gauthier (K8UT)) Date: Wed Oct 12 07:59:09 2005 Subject: [Dx4win] The <backspace> key in MMTTY versus DX4Win with MMTTY-engine Message-ID: <[EMAIL PROTECTED]> I have been using MMTTY and DX4Win as stand-alone programs for several years, and now with the latest DX4Win release supporting MMTTY have started using the "integrated" version. There seems to be a difference between the text editor in the transmit window of the MMTTY program itself and in the MMTTY-engine. - When using the MMTTY program, pressing the <backspace> key erases characters from the transmit buffer, and I can correct my typing mistakes. Typing "TESL<backspace>T" sends "TEST". - When using DX4Win with the MMTTY engine, pressing the <backspace> key (or ctrl-H) has no effect on the contents of the transmit buffer, and my spelling mistakes get transmitted anyway. Typing "TESL<backspace>T" sends "TESLT". Is this problem a function of MMTTY or DX4Win? Is there a special key I can type that will erase characters in the MMTTY-engine editor? (Note that I am talking about situations in which there are lots of characters stored in the transmit buffer, not when I am typing into an empty buffer - where the <backspace> key has no effect in either mode) -larry K8UT From [EMAIL PROTECTED] Thu Oct 13 13:44:35 2005 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Thu Oct 13 13:45:31 2005 Subject: [Dx4win] Discrepancy Between LoTW and Station Log Message-ID: <[EMAIL PROTECTED]> Perhaps someone can help me out on this. I'm getting ready to upgrade my logging software to DX4WIN v. 7, so I'm bringing my LOTW rtecords up to date. After doing my latest upload, LoTW shows 4872 QSO's with 727 matches, while I have only 4092 in DX4WIN. Any ideas? I had some difficulty with my latest upload which may have contributed to the problem. Specifically, I attempted to sign only QSO's after the date of my previous upload--9/25/04, but that did not seem to work. So, I simply signed my entire .ADI file, and uploaded it. I thought the new file would simply replace the existing file, but perhpas it produced duplicate records? If so, is there a way to to search for and delete duplicate records? And if dupes are the problem, does it matter? Don't only confirmed matches really mattrer? Can I simply download the 727 matches to DX4WIN v. 7 whhen I install it, and not worry about the discrepancy? Thanks and 73! Frank WB2BXO From [EMAIL PROTECTED] Mon Oct 10 15:40:15 2005 From: [EMAIL PROTECTED] (Mel Friedman) Date: Fri Oct 14 10:50:45 2005 Subject: [Dx4win] Submission list Message-ID: <[EMAIL PROTECTED]> Help guys and gals: Whenever a log a new contact for a new band, new mode, or even new country, it does not show in the dxcc submission list in DX4WIN as needed to be sent to the buro. Although I have made numerous contacts in the last few months, the dxcc submission list under reports has not changed from the 125 card mark I was at in early summer. I can't send cards to buro if the reports function does not tell me which cards to pull. What did I screw up? Mel K2AT From [EMAIL PROTECTED] Fri Oct 14 11:10:19 2005 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Fri Oct 14 11:11:00 2005 Subject: [Dx4win] Submission list In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- Mel Friedman <[EMAIL PROTECTED]> wrote: > Whenever a log a new contact for a new band, new mode, or even new country, > it does not show in the dxcc submission list in DX4WIN as needed to be sent > to the buro. Although I have made numerous contacts in the last few months, > the dxcc submission list under reports has not changed from the 125 card mark > I was at in early summer. I can't send cards to buro if the reports function > does not tell me which cards to pull. Mel, DX4WIN does not work this way. You can only tell from the Country window whether you should send for this card. DXCC Submission status gets updated one of two ways: - DXCC -> Reports -> Submission - use the F2 key to confirm a QSO, DX4WIN will tell you if the confirmation results in a new award credit 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun Oct 16 11:47:26 2005 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Oct 16 11:48:30 2005 Subject: [Dx4win] DX4WIN.CTY Release #24 Available Message-ID: <[EMAIL PROTECTED]> DX4WIN.CTY Release #24 is ready for download: http://www.ad1c.us/dx4win/#Country You can follow the link above to see the release notes. Please let me know about any additions or corrections. Remember, the database is updated mostly by need, there is no fixed schedule. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
