Well, unfortunately Ron, the radio will not "center" on the psk frequency when in lower sideband. I want to be able to put the signal in the middle of the pass band of my filter which is at 1500 hz. Being able to decode the psk signal on lower or upper sideband is not the issue here. Hope that explains it.
73 Jay Jay Hainline KA9CFD EN40om Colchester, IL -----Original Message----- From: Ronald A Loneker Sr KA2BZS [mailto:[EMAIL PROTECTED] Sent: Friday, October 28, 2005 13:29 To: Jay Hainline Subject: Re: [Dx4win] SSB mode changes when centering frequency for PSK31 Hi Jay.. I use LSB or USB for PSK31 with no problems. So I leave my rig on LSB on 40 & 80M.. RTTY is only LSB though. FWIW..Ron Jay Hainline wrote: >I have a question for the group on how to stop the radio from changing >modes when I click to center the radio for PSK31 operation. I am using >DX4WIN ver. 7.01 interfaced to an Icom 756proII using the 756pro radio >control settings. The problem occurs when listening to PSK31 on 40 or >80 meters using USB. When you click to center the radio on the signal, >it defaults to LSB. I would like to know what to change to keep the >software from flipping the radio from USB to LSB when on 80 or 40 >meters PSK31. > >73 Jay > >Jay Hainline KA9CFD EN40om >Colchester, IL > > >_______________________________________________ >Dx4win mailing list >[email protected] http://mailman.qth.net/mailman/listinfo/dx4win > > > > -- Ronald A. Loneker Sr. KA2BZS #1DXCC * 160M DXCC * A1-OP * NJDXA * 9BDXCC Honor Roll (CW-SSB-Mixed) See my New Flex-flyer Key (Pat. pending) at: http://www.cwforever.com
