The microKEYER is not only a "keyer" and it can be used by Dx4Win as a radio control interface, CW interface, PTT interface, PSK interface and RTTY interface. My own Dx4Win 7.01 can do all this things using 3 different com: ports created by the USB device router: one usb port handle 3 com: ports... I think it's a good stuff, folks!
Isn't it? 73s de Leo, IZ5FSA Marc Wullaert ha scritto: > This keyer is not supported by DX4WIN.... why advertise here ? > Marc on4ma > > ----- Original Message ----- > From: "Joe Subich, W4TV" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, September 01, 2005 10:24 PM > Subject: [Dx4win] WinKey with USB ... > > > >>The new microHAM CW Keyer is now shipping. I have been told >>that the initial batch left Slovakia for the US yesterday. >>Additional units should follow on a regular basis. >> >>What is the microHAM CW Keyer? For full details see: >> www.microham-usa.com/Products/ck.html >> >>In short: CW KEYER is a powerful USB CW interface/memory >>keyer based on the K1EL WinKey chip and microKEYER technology. >>CW Keyer provides the CW features of the original microKEYER >>and a USB radio control (CAT) interface in a small, readily >>portable package for those with who do not need the audio >>handling of microKEYER. >> >>CW KEYERT uses a single USB port and is directly supported by >>many logging and contest programs for both radio control and >>CW transmission. CW KEYER also supports a PS/2 keyboard for >>keyboard sent CW and control of the memory functions or a PS/2 >>keypad for message control only. The keyboard or keypad function >>even when CW KEYER is connected to a computer. The user can >>program up to nine "extra messages" into CW Keyer and use the >>keypad to send them as needed even if the keyer is under control >>of an application program (logger, contest logger, etc.). >> >>CW Keyer has two RCA outputs on the rear panel ... although >>they are labeled "CW" and "PTT" the outputs are driven by Pin3 >>and Pin5 of the WinKey chip and can be used to key two different >>radios if supported by the controlling application. Alternatively, >>the CW and PTT outputs can be used as inputs to a traditional >>switch box. >> >>73, >> >> ... Joe Subich, W4TV >> microHAM America, LLC >> www.microHAM-USA.com >> >> >> >>_______________________________________________ >>Dx4win mailing list >>[email protected] >>http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> >>-- >>No virus found in this incoming message. >>Checked by AVG Anti-Virus. >>Version: 7.0.344 / Virus Database: 267.10.18/87 - Release Date: 1/09/2005 >> >> > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > > --- > avast! Antivirus: Inbound message clean. > Virus Database (VPS): 0535-2, 31/08/2005 > Tested on: 02/09/2005 14.15.28 > avast! - copyright (c) 1988-2004 ALWIL Software. > http://www.avast.com > > > > -- From [EMAIL PROTECTED] Fri Sep 2 09:00:46 2005 From: [EMAIL PROTECTED] (Joe Subich, W4TV) Date: Fri Sep 2 09:05:35 2005 Subject: [Dx4win] WinKey with USB ... In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Although WinKey is not supported by DX4WIN (an unfortunate oversight), the microHAM CW Keyer supports software CW on the DTR line which is supported by DX4WIN. CW Keyer is useful for radio control and as a CW output device. The enhanced WinKey capabilities, with message memory and paddle input, continue to function in parallel with the DX4WIN generated CW. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com > -----Original Message----- > From: Marc Wullaert [mailto:[EMAIL PROTECTED] > Sent: Friday, September 02, 2005 1:42 AM > To: Joe Subich, W4TV; [email protected] > Subject: Re: [Dx4win] WinKey with USB ... > > > This keyer is not supported by DX4WIN.... why advertise here > ? Marc on4ma > > ----- Original Message ----- > From: "Joe Subich, W4TV" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, September 01, 2005 10:24 PM > Subject: [Dx4win] WinKey with USB ... > > > > > > The new microHAM CW Keyer is now shipping. I have been told > > that the initial batch left Slovakia for the US yesterday. > > Additional units should follow on a regular basis. > > > > What is the microHAM CW Keyer? For full details see: > > www.microham-usa.com/Products/ck.html > > > > In short: CW KEYER is a powerful USB CW interface/memory > > keyer based on the K1EL WinKey chip and microKEYER technology. > > CW Keyer provides the CW features of the original microKEYER > > and a USB radio control (CAT) interface in a small, readily > > portable package for those with who do not need the audio > > handling of microKEYER. > > > > CW KEYERT uses a single USB port and is directly supported by > > many logging and contest programs for both radio control and > > CW transmission. CW KEYER also supports a PS/2 keyboard for > > keyboard sent CW and control of the memory functions or a PS/2 > > keypad for message control only. The keyboard or keypad function > > even when CW KEYER is connected to a computer. The user can > > program up to nine "extra messages" into CW Keyer and use the > > keypad to send them as needed even if the keyer is under control > > of an application program (logger, contest logger, etc.). > > > > CW Keyer has two RCA outputs on the rear panel ... although > > they are labeled "CW" and "PTT" the outputs are driven by Pin3 > > and Pin5 of the WinKey chip and can be used to key two different > > radios if supported by the controlling application. Alternatively, > > the CW and PTT outputs can be used as inputs to a traditional > > switch box. > > > > 73, > > > > ... Joe Subich, W4TV > > microHAM America, LLC > > www.microHAM-USA.com > > > > > > > > _______________________________________________ > > Dx4win mailing list > > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Anti-Virus. > > Version: 7.0.344 / Virus Database: 267.10.18/87 - Release > Date: 1/09/2005 > > > > >
