Can DX4WIN print qsl cards with complete
qso info simular to DX base ?
73 Al - LA9SN
-----
En e-post tjeneste fra Mimer Internett - http://webmail.mimer.no
From [EMAIL PROTECTED] Thu Sep 8 15:57:49 2005
From: [EMAIL PROTECTED] (Ronald A. Loneker Sr. KA2BZS)
Date: Thu Sep 8 16:03:13 2005
Subject: [Dx4win] CAT Problem Solved..
Message-ID: <[EMAIL PROTECTED]>
Thanks to the few who emailed me regarding my radio time out error..
Apparently putting a serial
mouse in COM1 to verify the port is working does not really do it. My
serial mouse that I put into the port works but my Mark V does not work
on this port anymore for some reason.. I put a 25 pin to 9 pin connector
on the 25 pin connector COM2 and set the rig for this port and it works
fine..
I put another computer on and put the rig on COM1 and it likes it.. Go
figure!.. Must be gremlins.
73/DX.. Ron
--
Ronald A. Loneker Sr. KA2BZS
#1DXCC * 160M DXCC * A1-OP * NJDXA * 9BDXCC
Honor Roll (CW-SSB-Mixed)
See my New Flex-flyer Key (Pat. pending) at:
http://www.cwforever.com
