This site has agreat selection of slashed zero fonts too and I checked the links first lol! http://www.k8zt.com/zero.html
73, Todd WM8C's Ham Links www.wm8c.com All outgoing email scanned with NAV2005 ----- Original Message ----- From: William Blick To: Todd Sent: Sunday, April 23, 2006 9:39 PM Subject: Re: [Dx4win] Slashed 0 font Hi Todd, had a little trouble getting the fonts downloaded from the qsl.net web site but was able to get them at this url of WA6AXE http://www.navycthistory.com/wa6axe/fonts.html Thanks for the help. Bil W8EB ----- Original Message ----- From: "Todd" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, April 23, 2006 8:38 PM Subject: Re: [Dx4win] Slashed 0 font > Don't know what you typed into Google buthis was the first choice I got > :O) and for anyone else lokingf or them > http://www.qsl.net/wa6axe/fonts.html > > Todd > WM8C's Ham Links > www.wm8c.com > All outgoing email scanned with NAV2005 > Hi All, > > Computer crashed and I lost the slashed 0 font I had on it. It was K9YY > - C2, can any one let me have this ?? I tried a google search to no > avail > > Thanks........... By the way, I also forgot where I have to put the > font! Can you help me on this to?? > > Many thanks 73's Tony G8DQZ > > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > From [EMAIL PROTECTED] Mon Apr 24 06:14:30 2006 From: [EMAIL PROTECTED] (ON4AOI) Date: Mon Apr 24 06:16:44 2006 Subject: [Dx4win] Antenna rotor and two diferent directions? In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hi Anders, The 90 deg OFFSET for your 30 meter is 100 % possible The second question in NO since there is no parameter setup for all antennas Meaning the selection between beam or dipole, This can only take 30 seconds more time or you stop manually F1 = HELP in the rotator control panel Rotator | Parameters Open the rotator control Window. The rotator control window lets you specify a number of operational parameters and will accept a heading otherwise not available from the QSO Window. When setting the heading, the current band shown in the QSO Window is used to set the actual direction for the antenna using the parameters described below. The Title bar of this window will show the calculated direction after applying the Correction and a possible Offset or Reverse direction. Final values of less than 2 degrees and more than 358 degrees are changed to 2 and 358 degrees respectively. The Rotate and Stop buttons (see below) can be used to see what happens, even if no rotator control device has been enabled. Fields Heading An entry field to set the heading. When the rotate command is executed from the QSO Window, this field will contain the desired heading. Correction A value added to the heading to correct for any misalignment of the mast in the rotator. Offset A value added to heading to allow for antennas mounted in a different direction than the main antenna. Used only when the use of the offset is specified in the Status field (see below) for a particular band. Band When changing the Band field, the Status field on the right will show what should happen when a heading is selected for the band shown in the QSO window. Status This field can contain four different values for every band Disabled A command for a new beam heading will be ignored Normal The heading will be used as specified. With Offset The value of the offset field will be added to the desired heading. This allows for example to have a 40m beam mounted at 90 degrees on the same mast. Reverse Assumes a revers mounted antenna; 180 degrees will be added to the desired heading. Buttons Rotate Use the value in the Heading field and the band from the current QSO to set the beam heading Stop The rotator will stop rotating Ok Save all data changes made and exit. Cancel Ignore all data changes made and exit. 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Janis SM4RNA Sent: Monday, April 24, 2006 8:27 AM To: [email protected] Subject: [Dx4win] Antenna rotor and two diferent directions? Hi! I am about to put a horisontal dipole for 30m under my "5 band" log periodic. The dipole will be mounted at a 90 degre angle compared to the log periodic. The rotator is controlled with EA4TX rotator control PCB and Arswin soft that is controlled with Dx4Win. Is there any way to get the 90 degree offset atuomatic with a 30 m band change? Is there any way to make DX4Win understand that the antenna is bi-directional and by automatic choose the direction that is the closest? de Anders SM4RNA _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
