I am trying to use the calendar function in DX4WIN 7 and would like to know if there is source for an importable file.
73, Adam WD4DDU From [EMAIL PROTECTED] Sat Feb 4 16:44:34 2006 From: [EMAIL PROTECTED] (Cliff Ahrens) Date: Sat Feb 4 16:52:45 2006 Subject: [Dx4win] DYMO Labelwriter 320 In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> With the Dymo label # 30334 (57 mm x 32 mm), the long side (57 mm) of the label is parallel to the cutter on the Dymo 400 Turbo, and when printing with DX4WIN, the top of the printed label comes out first, with the bottom of the label last. My DX4WIN custom QSO data label, using portrait mode checked in both DX4WIN and in the printer setup, prints to within 2 mm top and left side, within 3 mm on the bottom, and about 4 mm on the right side. Maybe the larger or different labels require the 6.3 mm margin, but I haven't noticed that issue on the Dymo #30334 label. Cliff K0CA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dick Flanagan Sent: Saturday, February 04, 2006 2:12 PM To: Rune Grundstr?m Cc: [email protected] Subject: Re: [Dx4win] DYMO Labelwriter 320 At 11:42 PM 2/2/2006, Rune Grundstr?m wrote: >Hi folks. I am using a Dymo Labelwriter 320 with labelsize 35 * 88 mm. My >problem is that can't fill the whole label. Nearly 1/3 above the call is >white/unfilled. I have tried a lot of settings in the Label Editor but nil! >I have seen lately that some of u DX4WIN - users are using the Dymo >labelwriter so please give me some hints how to get all the label filled!. >...or do u all have the same problem? I am using the latest version av I was unable to use my Dymo Labelwriter 400 with DX4WIN because the printer driver forces a mandatory 0.25" (6.3 mm) left margin when printing in the landscape mode (this is what killed my particular custom label). This equates to a similar mandatory 0.25" (6.3 mm) top margin when printing in the portrait mode. To try to clarify the landscape/portrait stuff, when the printed label tape begins to exit the printer, the first edge of the label to appear is the bottom in portrait mode. As the label fully exits the printer, the last edge to exit is the top in portrait mode. It is this last edge to exit that requires the mandatory 0.25" (6.3 mm) white space from the edge to the start of printing. I have spoken at length with Dymo Tech Support and this is simply an undocumented "feature" that cannot be changed. I bought the printer so I could print QSL labels, but with more experience with the device it is clear to me that it would have been a pain to change back and forth between QSL and address labels. I use the printer now strictly for address labels. For the QSLs I use 8.5" x 11" label sheets and have learned how to easily print off only one or two at a time. 73, Dick -- Dick Flanagan K7VC NV SM E-mail: [EMAIL PROTECTED] _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.1/250 - Release Date: 2/3/2006
