Thanks to both Jim and to Kostas - I have forwarded your recommendation
to my friend. I knew about this path, and figured he would have tried it
first, but perhaps he doesn't know about it. Thanks for the tip - he
knows now!
73, Duane
On Fri, 24 Feb 2006 01:32:59 +0200 "Kostas Stamatis SV1DPI"
<[EMAIL PROTECTED]> writes:
> In qso window
> qso>multiple qso operations>set upload date
> and put an empty date (without numbers)
>
> Best 73
> Kostas SV1DPI
>
> ----- Original Message -----
> From: "Duane A Calvin" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Thursday, February 23, 2006 8:58 PM
> Subject: [Dx4win] Resetting upload date
>
>
> >A friend attempted to make his first upload to LOTW, and something
> had
> > problems. He now has the situation where he does not have the
> ADIF file,
> > nothing completed the Trusted QSL, and he has no upload to LOTW.
> But, all
> > his upload dates are set, and that appears to be preventing him
> from
> > creating another ADIF file (actually two - two different
> callsigns) for
> > upload. How does one reset all the upload dates in the log so
> the
> > process can be started over?
> >
> > 73, Duane
> >
> >
> > Duane Calvin, AC5AA
> > Austin, Texas
> > _______________________________________________
> > Dx4win mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/dx4win
> >
> >
>
>
>
>
--------------------------------------
Duane Calvin, AC5AA
Austin, Texas
http://home.austin.rr.com/ac5aa
From [EMAIL PROTECTED] Fri Feb 24 03:31:51 2006
From: [EMAIL PROTECTED] (Art - W6KY)
Date: Fri Feb 24 03:33:57 2006
Subject: [Dx4win] Internet Callsign Lookup
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
The way I print Direct cards with address labels is
I make the call I worked the manager..
N6CW via N6CW N6CW in the QSL MGR box
and I get an address label..
Kinda hokie, but I AM sending it via N6CW HI HI
For QSL managers I use IK3QAR
http://www.ik3qar.it/manager/man_result.php?call=
is my string in 'callsign lookup address' ..
73, Art W6KY
www.w6ky.com
--- Tony Lord <[EMAIL PROTECTED]> wrote:
> Art,
>
> Thanks for info, OK I have done this and now when I
> print QSL labels,
> all those going direct, where there is a QSL
> manager, now result in two
> labels being produced, (1) for QSL card with QSO
> info and (2) address
> label for QSL manager. Great and thanks !!!
>
> Clearly I only need address labels to be produced
> for direct cards. So
> now any direct card with a QSL manager prints off an
> address label. So
> how do I automatically print off an address label
> where the contact does
> not have a QSL manager???
>
> Which file keeps this information within the save
> directory of DX4WIN,
> because I assume that when I am upgradeing the
> software (and QSL manager
> updates?) I need to save this information??
>
>
> One final question, if I may. With preferances for
> external data, I have
> it checked.
>
> For Callsign look up I have :
> http://www.qrx.com/callsign?QSL= By
> hitting F3 and return, a web brousers opens giving
> me contact
> information.
>
> For QSL manager lookup address, I have :
> http://www.qrz.com/ If I have
> highlighted QSL manager and hit F3, pop up box
> appears, if I then hit
> return nothing happens, I am not directed to QRZ.COM
> to locate managers
> details.
>
> Any thoughts??
>
> Thanks 73's de Tony G8DQZ
>
> -----Original Message-----
> From: Art - W6KY [mailto:[EMAIL PROTECTED]
> Sent: 23 February 2006 02:14
> To: Tony Lord; [EMAIL PROTECTED]; 'Duane A Calvin'
> Cc: [email protected]
> Subject: RE: [Dx4win] Internet Callsign Lookup
>
> Place your cursor in the QSL MGR box in the main
> screen.
> Hopefully you have the call of the mgr entered. Hit
> 'ctl e' and a new window will open for the address
> of
> that manager. You should already have the address of
> that manager ready. Now enter (paste, copy) into
> that
> QSL manager address box....
> When you print your QSL's, every call associated
> with
> that manager will be printed with the managers
> address
> label...example: W3HNK manager might have several
> DX labels to attach to you cards and put in an
> envelope
> to Joe.....When printing those labels will all be
> grouped
> with Joe's call.... Great feature.. I use it for
> every
> manager and the cool thing is DX4WIN remembers all
> the
> addresses for every batch of QSL labels...
> 73 es DX, Art W6KY
> www.w6ky.com
>
>
> --- Tony Lord <[EMAIL PROTECTED]> wrote:
>
> > Alan,
> >
> > Reading your comments below, I have the QRZ.com
> > facility on line and
> > fully functioning. I am interested about printing
> > labels from QRZ.com
> > for either call or his qsl manager.
> >
> > You are obtaining QTH details from mailing list
> > label section of
> > QRZ.com? You copy this and then paste it where??
> (
> > you say "in to QSL
> > manager box on the main window" or address for
> > actual call). Please
> > explain further I don't 100% understand where u
> are
> > pasting to?
> >
> > Are you saying that QSL card label now will also
> > have address info??
> >
> >
> > Thanks & 73's de Tony G8DQZ
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf
> Of
> > Alan Zack
> > Sent: 22 February 2006 02:30
> > To: Duane A Calvin
> > Cc: [email protected]
> > Subject: Re: [Dx4win] Internet Callsign Lookup
> >
> > I'm not sure if I fully understand the question
> but
> > it seems to work
> > fine for me. The only complaint I have is that
> the
> > CALLSIGN/MGR LOOKUP
> > window does not automatically open with the rest
> of
> > the windows when you
> >
> > start up DX4WIN. I wish it would. Each time I
> > start DX4WIN I hit F3 to
> >
> > open the window and leave it open. When I log a
> > call or do a search for
> >
> > a call then that call will appear in the F3
> CALLSIGN
> > window. The info
> > from the RAC then appears in the large F3 window
> as
> > well as any QSL Mgr
> > info from the GOLIST. If the CTY file contains a
> > QSL Mgr for this call
> > then it will appear in the QSL MGR box. Then I
> can
> > move my cursor
> > behind either call and hit enter and the QRZ.COM
> > page for entry for that
> >
> > call opens and appears. That allows me to compare
> > the RAC/GOLIST info
> > against the QRZ.COM info. I can then go to the
> > mailing label link for
> > the call on QRZ.COM, highlight the address, then
> cut
> > and paste the
> > address into the QSL MGR box on the main window or
> > do the same with the
> > GOLIST address shown in the F3 window. If there
> is
> > no QSL Mgr then I
> > cut and paste the address for the actual call
> here.
> > That way my QSL
> > labels will have the QSO info plus an address
> label
> > for mailing the QSL
> > card. It all works pretty smoothly once you get
> > used to it. If anyone
> > knows any shortcuts please share.
> > 73, Alan, K7ACZ
> >
> > Duane A Calvin wrote:
> >
> > >Dick's response echos my experience also. F3 to
> > bring up the Lookup
> > >window with response from your callsign database
> on
> > your PC, and any
> > >manager lookups (I use GOLIST which works great).
>
> > Then, with this
> > window
> > >active, hit "Enter" and it will send the same
> > request to QRZ.COM and a
> > >browser window will open and you'll see the info
> > there. I think this
> > is
> > >documented somewhere, but not sure where.
> > >
> > > 73, Duane
> > >
> > >
> > >On Tue, 21 Feb 2006 15:35:46 -0800 Dick Flanagan
> > <[EMAIL PROTECTED]>
> > >writes:
> > >
> > >
> > >>At 03:02 PM 2/21/2006, Jim Reisert AD1C wrote:
> > >> >I think you have to hit F3 twice. I was going
> > to write an
>
=== message truncated ===
I refuse to join any club that would have me as a member.
From [EMAIL PROTECTED] Fri Feb 24 17:28:16 2006
From: [EMAIL PROTECTED] (Ed Roberts)
Date: Fri Feb 24 19:36:12 2006
Subject: [Dx4win] Announce DX Question
Message-ID: <[EMAIL PROTECTED]>
I am using Ver 7.01.. When I try to Announce DX my callsign always appears
appended in the Remarks Column of the DX spots window & never in the Spotter
column, which always is left blank. Any body know what I am doing wrong?
Thanks, Ed W3EWR
From [EMAIL PROTECTED] Fri Feb 24 20:14:37 2006
From: [EMAIL PROTECTED] (=?iso-8859-1?Q?Isidro_Acosta_Hern=E1ndez?=)
Date: Fri Feb 24 20:17:07 2006
Subject: [Dx4win] Announce DX Question
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Hello...
I am using Ver 7.01.. When I try to Announce DX my callsign always appears
appended in the Remarks Column of the DX spots window & never in the
Spotter column, which always is left blank. Any body know what I am doing
wrong?
Make sure you have the following characters in the
Preferences/Packet2/DX Spotting patterns:
DX|DE|r:|f|c|q|tZ
f|c|d|tZ|q|<r>
r|f|c|q|<t|d>
DX|c|f|q
DX DE|r:|f|c|q|tZ *
73 de Isidro, EA8NQ
E-mail: [EMAIL PROTECTED]
---------------------------------------
Visit the EA8NQ's DX Page (in Spanish):
www.ure.es/ea8nq/
---------------------------------------
From [EMAIL PROTECTED] Fri Feb 24 20:24:39 2006
From: [EMAIL PROTECTED] (=?iso-8859-1?Q?Isidro_Acosta_Hern=E1ndez?=)
Date: Fri Feb 24 20:27:35 2006
Subject: [Dx4win] Announce DX Question
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Hello...
> I am using Ver 7.01.. When I try to Announce DX my callsign always
> appears appended in the Remarks Column of the DX spots window & never in
> the Spotter column, which always is left blank. Any body know what I am
> doing wrong?
Make sure you have the following characters in the
Preferences > Packet2 > DX Spotting patterns:
DX|DE|r:|f|c|q|tZ
f|c|d|tZ|q|<r>
r|f|c|q|<t|d>
DX|c|f|q
DX DE|r:|f|c|q|tZ *
73 de Isidro, EA8NQ
E-mail: [EMAIL PROTECTED]
---------------------------------------
Visit the EA8NQ's DX Page (in Spanish):
www.ure.es/ea8nq/
---------------------------------------
From [EMAIL PROTECTED] Fri Feb 24 20:50:22 2006
From: [EMAIL PROTECTED] (Ed Roberts)
Date: Fri Feb 24 20:52:38 2006
Subject: [Dx4win] Announce DX Question
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Thank you Isidro! I am trying to correct.
Is the 1st line:
DX|DE|r:|f|c|q|tZ or should it be
DX DE|r:|f|c|q|tZ
I tried both & neither seems to work for me?
Thanks Ed W3EWR
----- Original Message -----
From: "Isidro Acosta Hern?ndez" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, February 24, 2006 8:24 PM
Subject: Re: [Dx4win] Announce DX Question
> Hello...
>
>> I am using Ver 7.01.. When I try to Announce DX my callsign always
>> appears appended in the Remarks Column of the DX spots window & never in
>> the Spotter column, which always is left blank. Any body know what I am
>> doing wrong?
>
> Make sure you have the following characters in the
> Preferences > Packet2 > DX Spotting patterns:
>
> DX|DE|r:|f|c|q|tZ
> f|c|d|tZ|q|<r>
> r|f|c|q|<t|d>
> DX|c|f|q
> DX DE|r:|f|c|q|tZ *
>
>
> 73 de Isidro, EA8NQ
> E-mail: [EMAIL PROTECTED]
>
> ---------------------------------------
> Visit the EA8NQ's DX Page (in Spanish):
> www.ure.es/ea8nq/
> ---------------------------------------
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
From [EMAIL PROTECTED] Fri Feb 24 22:03:53 2006
From: [EMAIL PROTECTED] (Alan Sewell)
Date: Fri Feb 24 22:06:08 2006
Subject: [Dx4win] Announce DX Question
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Ed,
Those patterns are only used for the program to recognize a dx spot.
They have nothing to do with sending out spots.
Unfortunately, I don't have any suggestions for solving your problem.
73,
Alan N5NA
Ed Roberts wrote:
> Thank you Isidro! I am trying to correct.
> Is the 1st line:
> DX|DE|r:|f|c|q|tZ or should it be
> DX DE|r:|f|c|q|tZ
>
> I tried both & neither seems to work for me?
> Thanks Ed W3EWR
>
> ----- Original Message ----- From: "Isidro Acosta Hern?ndez"
> <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Friday, February 24, 2006 8:24 PM
> Subject: Re: [Dx4win] Announce DX Question
>
>
>> Hello...
>>
>>> I am using Ver 7.01.. When I try to Announce DX my callsign always
>>> appears appended in the Remarks Column of the DX spots window &
>>> never in
>>> the Spotter column, which always is left blank. Any body know what I am
>>> doing wrong?
>>
>> Make sure you have the following characters in the
>> Preferences > Packet2 > DX Spotting patterns:
>>
>> DX|DE|r:|f|c|q|tZ
>> f|c|d|tZ|q|<r>
>> r|f|c|q|<t|d>
>> DX|c|f|q
>> DX DE|r:|f|c|q|tZ *
>>
>>
>> 73 de Isidro, EA8NQ
>> E-mail: [EMAIL PROTECTED]
>>
