I was able to copy the FHIGH string from the IC-706 .rig file, and paste it into the IC-746 .rig file, to fix the problem myself. Definitely something that would need to be fixed by DX4WIN at some point, as the IC-746 operates from 1.8 to 148Mhz.
Anyway, problem solved... thanks to DX4WIN for making settings like this editable (even if it was a bit cryptic) - Scott KA9FOX At 01:33 PM 7/15/2006 -0500, Scott Neader KA9FOX wrote: >I have the same problem as listed below, but for my IC-746. When I try to >use frequency control for 6m or 2m, it says "Bad Frequency for Radio". > >Is this a bug, or something I can do here to fix? > >FYI, I am using DX4WIN 7.02 (unsure of build) > >Thanks in advance! > >- Scott KA9FOX > >At 08:12 AM 4/12/2006 -0400, Jim Reisert AD1C wrote: > >>At 10:27 AM 4/8/2006, David M. Monfried wrote: >> >>>Wondering if anyone else is experiencing this problem controlling the IC7000 >>>with DX4WIN: when I click on an HF DX spot, the radio jumps to the correct >>>frequency and mode, but if I click on a 6m or 2m spot, I get the error >>>message, "Bad frequency for radio." >> >>Hi Dave, >> >>It sounds like the .RIG file for the IC-7000 doesn't know that the radio >>can do both 6 and 2 meters. >> >>Paul, can you address this please? >> >>73 - Jim AD1C > > > > > >--------------------------------------------------------------- >Scott Neader KA9FOX [EMAIL PROTECTED] >Free Ham Radio Classified Ads: http://swap.QTH.com >Web Hosting Services: http://hosting.QTH.com >$9.95/year Domains: http://domains.QTH.com >KA9FOX Contesting & DXing Site: http://www.ka9fox.com >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win > > > --------------------------------------------------------------- Scott Neader KA9FOX [EMAIL PROTECTED] Free Ham Radio Classified Ads: http://swap.QTH.com Web Hosting Services: http://hosting.QTH.com $9.95/year Domains: http://domains.QTH.com KA9FOX Contesting & DXing Site: http://www.ka9fox.com
