Teijo Murtovaara wrote:
> Juha Rantanen kirjoitti:
>> Teijo Murtovaara wrote:
>>> Has anybody been able to import us counties into DX4Win from LoTW
>>> (adif-files)? I would not want to do that manually.
>>
>> Teijo,
>>
>> I noticed today that when I imported from LOTW also the US counties
>> were updated. I have never entered one in my life and still there are
>> some filled in.
>>
>> Notes for this QSO included this info:
>> LOTW: State=CO County=Larimer Grid=DN70ki
>>
>> 73,
>> Juha OH6XX
>>
>>
> Juha,
>
> When I import the adif-file (or report) I use the option "set upload
> confirmed flag". I think you must have been using the option "imported
> QSO replaces existing QSO". I would not want to interfere with the
> original log in any way except updating the upload cfm flag and the
> county information. I guess I just can't have them both automagically
> updated.
Teijo,
I used the "Imported QSO sets Upload Confirmed flag". I didn't replace
the existing data. But I did some testing and noticed that if you
already have Upl Cnf = Y the extra data isn't imported. I just imported
all the data since the beginning of LOTW and only 8 QSO's got the extra
data imported. Those 8 QSO's weren't confirmed by LOTW before this
latest import. So if one wants to import all the data with the "Imported
QSO sets Upload Confirmed flag" -option the log must have all the Upl
Cnf as N. But there is no way to change all the Upl Cnf from Y to N
automatically. Or if someone knows a way please inform us.
73,
Juha OH6XX
From [EMAIL PROTECTED] Tue Jul 18 14:50:31 2006
From: [EMAIL PROTECTED] (Teijo Murtovaara)
Date: Tue Jul 18 15:00:42 2006
Subject: [Dx4win] Importing us counties from LoTW
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Juha Rantanen kirjoitti:
> Teijo Murtovaara wrote:
>> Juha Rantanen kirjoitti:
>>> Teijo Murtovaara wrote:
>>>> Has anybody been able to import us counties into DX4Win from LoTW
>>>> (adif-files)? I would not want to do that manually.
>>>
>>> Teijo,
>>>
>>> I noticed today that when I imported from LOTW also the US counties
>>> were updated. I have never entered one in my life and still there are
>>> some filled in.
>>>
>>> Notes for this QSO included this info:
>>> LOTW: State=CO County=Larimer Grid=DN70ki
>>>
>>> 73,
>>> Juha OH6XX
>>>
>>>
>> Juha,
>>
>> When I import the adif-file (or report) I use the option "set upload
>> confirmed flag". I think you must have been using the option "imported
>> QSO replaces existing QSO". I would not want to interfere with the
>> original log in any way except updating the upload cfm flag and the
>> county information. I guess I just can't have them both automagically
>> updated.
>
> Teijo,
>
> I used the "Imported QSO sets Upload Confirmed flag". I didn't replace
> the existing data. But I did some testing and noticed that if you
> already have Upl Cnf = Y the extra data isn't imported. I just imported
> all the data since the beginning of LOTW and only 8 QSO's got the extra
> data imported. Those 8 QSO's weren't confirmed by LOTW before this
> latest import. So if one wants to import all the data with the "Imported
> QSO sets Upload Confirmed flag" -option the log must have all the Upl
> Cnf as N. But there is no way to change all the Upl Cnf from Y to N
> automatically. Or if someone knows a way please inform us.
>
> 73,
> Juha OH6XX
> _______________________________________________
Juha,
I cannot reproduce that. The upload cfm flag changes to Y but the county
is not updated. The upload flag was N before the import. These
contacts were not confirmed by card. I am using v 6.04. The adif file
contains the county in the following format <CNTY:11>MN,HENNEPIN. Is
this format good for 6.04?
Teijo OH6NIO
