Well I have to say that I am very disappointed about the move backwards in
the latest version of DX4WIN. One of it's strongest points was the excellent
QSL card routine.
I have been printing directly to cards for several years now and it has
always been so easy.
Now the QSLMethod, QSL Manager and Group are defaulted exactly the way I don
t want them.
I just wasted another 12 QSL cards because DX4WIN no longer remembers my
last settings on these, Why? It always worked fine in all of the older
versions.
PLEASE, please put it back the way it was.
I have over 250,000 QSOs in my log and I do a lot of QSLing.
5B4AGC
From [EMAIL PROTECTED] Wed Jun 7 13:13:00 2006
From: [EMAIL PROTECTED] (Anders Janis SM4RNA)
Date: Wed Jun 7 13:19:44 2006
Subject: [Dx4win] Re: Re:vichw11.sys ---------------> Now after re-install
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
I have now done a coplete re-install of Win XP PRO x64. Before I installed
any other software or created any user acounts I installed DX4Win and copied
the file. But NO! It do not work now either. I rebooted and tried again. No
luck. I copied the file to Dx4Win's map and also to c:\Windows, rebooted and
tried again. No, no no! It do not work.
What can I do?
/Anders
----- Original Message -----
From: "C?sar Rodrigues" <[EMAIL PROTECTED]>
To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
Sent: Wednesday, June 07, 2006 2:22 PM
Subject: Re: [Dx4win] Re: Re:vichw11.sys
>I bet it will solve. This is clearly a Windows privilege issue.
>
> Regards,
>
> Cesar PY2YP
>
> ----- Original Message -----
> From: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
> To: "C?sar Rodrigues" <[EMAIL PROTECTED]>; <[email protected]>
> Sent: Tuesday, June 06, 2006 6:45 PM
> Subject: Re: [Dx4win] Re: Re:vichw11.sys
>
>
>> As I did a clean install with new partition and full format, I doubt that
>> a re-install of Windows will be the solution.
>>
>> /Anders
>>
>>
>> ----- Original Message -----
>> From: "C?sar Rodrigues" <[EMAIL PROTECTED]>
>> To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
>> Sent: Monday, June 05, 2006 2:53 PM
>> Subject: Re: [Dx4win] Re: Re:vichw11.sys
>>
>>
>>>I used to have this kind of problem here in the office, I simply gave up.
>>>I did try everything with the network experts here in the job with no
>>>luck. Looks like a problem with the XP administrator privileges. I strong
>>>suggest you to re-install the XP. If you find any other solution please
>>>let us know.
>>>
>>> Fortunately enough I don't have this kind of problem at home.
>>>
>>> 73 Cesar - PY2YP
>>>
>>> ----- Original Message -----
>>> From: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
>>> To: <[email protected]>
>>> Sent: Sunday, June 04, 2006 12:41 PM
>>> Subject: [Dx4win] Re: Re:vichw11.sys
>>>
>>>
>>>> Hi!
>>>>
>>>> I am logged in with administrator rights. I have installed and
>>>> configured the whole system with my current log in.
>>>>
>>>> I think the PC hates me.
>>>>
>>>> /Anders
>>>> ----- Original Message -----
>>>> From: RonnieB
>>>> To: [EMAIL PROTECTED]
>>>> Cc: [email protected]
>>>> Sent: Sunday, June 04, 2006 5:09 PM
>>>> Subject: Re:vichw11.sys
>>>>
>>>>
>>>> Hi Anders.
>>>>
>>>>
>>>> You have to be in "administrator" mode to run the program. The driver
>>>> needs to be installed for generating CW, and the program attempts to
>>>> check for it during startup, unsuccessfully if you're not an
>>>> administrator.
>>>>
>>>>
>>>> I (and others) have requested a program change to let Dx4Win run
>>>> without CW support if the driver's presence can't be verified, but the
>>>> authors haven't responded.
>>>>
>>>>
>>>> There are two main reasons that I think the change should be made:
>>>>
>>>>
>>>> 1) The computer is more open to external attacks (hackers) in "admin"
>>>> mode.
>>>> 2) If you're just a user of the computer, and not able to set "admin"
>>>> authority
>>>> (my situation at the work QTH), you can't run the program.
>>>>
>>>>
>>>> -Ron N9QQK
>>>>
>>>>
>>>>> Hi!
>>>>>
>>>>> .Have just installed Win XP Pro x64 and DX4Win 7.02.15. When I try to
>>>>> lanch DX4Win I get the following error message.
>>>>>
>>>>> Error:
>>>>>
>>>>> Please copy the driver file: C:\Program Files
>>>>> (x86)\dx4w702\DRIVERS\vichw11.sys
>>>>> To: C:\WINDOWS\system32\Drivers\vichw11.sys
>>>>> The Appendix File has more information about this.
>>>>>
>>>>> I have done this and still the same happens. I have scanned the whole
>>>>> harddrive for Appendix and have not found an similar file.
>>>>>
>>>>> What to do?
>>>>>
>>>>> de Anders SM4RNA
>>>>> _______________________________________________
>>>>> Dx4win mailing list
>>>>> [email protected]
>>>>> http://mailman.qth.net/mailman/listinfo/dx4win
>>>>
>>>> _______________________________________________
>>>> Dx4win mailing list
>>>> [email protected]
>>>> http://mailman.qth.net/mailman/listinfo/dx4win
>>>>
>>>
>>>
>>
>>
>
>
