>Hi Randy, I just checked it with my setup, a DXDoubler with radio >selection off the parallel port and 2 756Pro's, and it seems to work >fine here. With the DXD in auto, selecting radio 1 in DX4win causes >the left radio to be selected for logging and the radio 1 lights in the >DXD to light. Selecting radio 2 in Dx4win selects the right radio >for logging and the radio 2 lights in the DXD to light.
Fixed it! Thanks for the information, Rick. Since you reported yours working properly, I did a little more detective work. It turns out there's a bit of a bug in the control logic code, one that may have been there forever. On the Preferences CW page, I had set the CW / PTT Interface to "None"since I have a Winkey I wanted to use for keying. This produced the upside-down control signal on LPT port pin 14. When I selected LPT1, the logic reversed itself and operated properly! So if anyone else has encountered the same problem, just be sure you have LPT CW/PTT keying selected and the program will act as expected. 73... Randy W8FN
