--- Duane A Calvin <[EMAIL PROTECTED]> wrote: > Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep > getting errors when I assign the sound card to the DigiKeyer's sound card > - says the device is already allocated. Tried changing from VOX to PTT, > but no help. Seems to be centered on the sound card choice, and it being > "busy" already.
Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 11:10:30 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jun 21 11:17:50 2006 Subject: [Dx4win] FO/F6CTL Message-ID: <[EMAIL PROTECTED]> The latest DX4WIN country file (Release 30) does not have the right information for FO/F6CTL. FO/F6CTL/M is mapped to Marquesas, the call should be FO/F6CTL (no /M) I assume the same will happen with Austral islands. This will be fixed in Release 31. If you want to fix it yourself, close your log, then File -> Databases -> Countries. Find Marquesas, click on the Callsign tab, then find FO/F6CTL/M starting 20 June 2006. Change it to FO/F6CTL and click on Calls -> Update (this last step is important). Do the same for Austral Islands and FO/F6CTL/A, changing it to FO/F6CTL. When you are done, File -> Save Changes and Exit. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 15:44:06 2006 From: [EMAIL PROTECTED] (John Shaw) Date: Wed Jun 21 15:51:40 2006 Subject: [Dx4win] PSK31 Window and microHam DigiKeyer In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Here is a little gem that gave me some grief in this area, not related to the device you are using, but DX4WIN it self. PTT Delay: A zero value indicates that PTT keying is not used. Note this came from the help file of 7.02, couldn't find it in 7.04 but I guess it still applies. I thought DX4WIN was broken until I read that and changed the zero value. I was getting some really strange results even when not using PTT. Hope this info may be of help in your case. 73 John ZL1BYZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: Thursday, 22 June 2006 2:23 a.m. To: Duane A Calvin; [email protected] Subject: Re: [Dx4win] PSK31 Window and microHam DigiKeyer --- Duane A Calvin <[EMAIL PROTECTED]> wrote: > Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep > getting errors when I assign the sound card to the DigiKeyer's sound card > - says the device is already allocated. Tried changing from VOX to PTT, > but no help. Seems to be centered on the sound card choice, and it being > "busy" already. Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
