On Mon, 6 Mar 2006 21:13:07 -0500, ki4fyr wrote: >?First, I appreciate all of the responses. ?My system is Icom >?756ProII, microHam box, dx4win set up. ?The radio is on and working >?fine, but the message Radio Timed Out comes up for no apparent >?reason. ?If I then check the microHam software, it is still reading >?the information from the radio just fine, frequency, mode. ?So it >?seems that it must be a problem with the dx4win software. ?
<snip> You're not checking microHam while DX4Win is up and running also, by chance? ---------------------------------------------------------------------- R. Wayne Day N5WD [EMAIL PROTECTED] Fort Worth, Texas USA ---------------------------------------------------------------------- From [EMAIL PROTECTED] Tue Mar 7 00:24:21 2006 From: [EMAIL PROTECTED] (Paul van der Eijk) Date: Tue Mar 7 00:25:35 2006 Subject: [Dx4win] Radio Time Out In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Larry, Download portmon from www.sysinternals.com It is free and will tell you which process is using what port. --Paul At 09:13 PM 3/6/2006, ki4fyr wrote: >First, I appreciate all of the responses. My system is Icom 756ProII, >microHam box, dx4win set up. The radio is on and working fine, but the >message Radio Timed Out comes up for no apparent reason. If I then check the >microHam software, it is still reading the information from the radio just >fine, frequency, mode. So it seems that it must be a problem with the dx4win >software. I will check my setup again. Thanks for all the help. Larry >Royster, ki4fyr. >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
