--- John Shaw <[EMAIL PROTECTED]> wrote: > A final thought. Make sure you delete any copies of the old builds of > 7.02 so that if you need to do a re install at a later date you don't > inadvertently use one of them.
If you open the folder that you downloaded the install program into, and hover your mouse over the DX4W702.EXE icon, you will see the build number. The same works for the DX4WIN.EXE file. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri May 19 17:39:58 2006 From: [EMAIL PROTECTED] (Stan Staten) Date: Fri May 19 17:44:34 2006 Subject: [Dx4win] Error connecting to radio Message-ID: <[EMAIL PROTECTED]> When switching to radio 2 I get the following error: "ie_BadId-Specified comport doesn't exist" This is curious because it sort of works in that the log shows the band radio 2 is on, but if I click on a spot I do get an error that the port is in use by something else. When I bring up V7.01 it works just fine. Setup: Win XP Pro Port in question COM3 via a USB->Serial converter DX4WIN 7.02 Build 14 Ram 512MB Processor AMD Athlon 3000 Radio 1 FT-1000MP on COM2 Radio 2 FT-897 on COM3 The port shows in the Device Manager and remains as COM3 when I plug it into a different USB port (it drops of the Device Manager list when I unplug it and then reappears when I plug it into a different USB port). Suggestions please. 73 Stan, N3HS
