Hi Dave, If there are already 8 comports on your computer then I suggest You connect your rig to one below 8. But mu guess is that your computer gave this number randomly Go in your Windows/SYSTEM/hardware/ports and change the comport NR to a number Below 8 that is not used.
73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David M. Monfried Sent: Wednesday, October 18, 2006 9:50 PM To: [email protected] Subject: [Dx4win] Comm port -> USB port adapter I'm using DX4WIN (latest version) to control an IC-7000. The rig is connected to the computer via a comm port-> USB adapter. The computer's Device Manager says the adapter is working properly as COM9. The problem is that DX4WIN only goes up to Comm8. Any ideas would be appreciated! Thanks. Dave, W2PK _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
