Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says "could not open winkey port 1". So then I try to close the window and then a modal dialog box appears with
An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - Paul K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ ============================== http://www.dx-is.com http://www.openhsmm.org ============================== From [EMAIL PROTECTED] Mon Oct 23 09:49:09 2006 From: [EMAIL PROTECTED] (ON4AOI) Date: Mon Oct 23 09:55:42 2006 Subject: [Dx4win] Winkey Problems In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Yep Paul, You have probably unplugged or plugged in the winkey via a USB to serial converter and then you get this problem. Check if winkey is on com1 or has a good connection you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3 times 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, October 23, 2006 3:15 PM To: [email protected] Subject: [Dx4win] Winkey Problems Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says "could not open winkey port 1". So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - Paul K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ ============================== http://www.dx-is.com http://www.openhsmm.org ============================== _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
