OK, I have done what Jim said, tnx..!
But what if I have multi-QSO cards and I want to select only one QSO from
them..? I am having troubles with that.
I want to endorse my CW DXCC, but when printing I got again several Qs that I
don?t want to have there. I just need 1 QSO for my CW DXCC.
I have tryed to select only what I want to get printed, but again, when I try,
it does not remain as I selected..!
What can I do..? Thanks.
Josep
EA6BF
From [EMAIL PROTECTED] Wed Apr 11 13:38:09 2007
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Wed Apr 11 13:42:38 2007
Subject: [Dx4win] DXCC endorsement
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
--- Josep <[EMAIL PROTECTED]> wrote:
> OK, I have done what Jim said, tnx..!
> But what if I have multi-QSO cards and I want to select only one QSO from
> them..? I am having troubles with that.
First of all, your DXCC preferences describe which awards you are interested
in. You can turn off bands or modes that you do not want to submit cards for.
This should be done BEFORE you do the Reports -> DXCC -> Submission.
If you are going to send your cards to ARRL, just put a "sticky note"
("Post-it(R)") on the QSL and point to the QSO(s) you want them to enter (make
it clear). This is what I have done in the past.
For the submission form, you can print it out and CROSS OUT the credits you do
NOT want. Or you can save it to a .CSV file, read the file into Excel or some
other spreadsheet program, and delete the lines you don't want. Then print the
sheet from within Excel.
You should also go into your logbook and turn off the submission flags for the
QSOs you will not submit. Use F5 to make the QSO window bigger until you see
the flags.
I hope I answered all your questions.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Wed Apr 11 20:03:45 2007
From: [EMAIL PROTECTED] (Karl Oyster, K1KO)
Date: Wed Apr 11 20:08:38 2007
Subject: [Dx4win] Bad License File????
Message-ID: <[EMAIL PROTECTED]>
Can anyone tell me (1) why my DX4WIN 7.02.15 has suddenly started
to give me a window which says "Bad License file" after signon,
and (2) what I can do to get it back as it should be??? The
logbook window still has all my QSOs in it, but the very top,
blue, space at the top of the screen says "DX4WIN demo."
The only thing that has changed is (I think) that I put the latest
country file in, following the instructions, the save directory.
Pretty sure I did it correctly.
Thanks, in advance,
Karl, K1KO
