Roger that one. I only hope the upcoming E4 party is near as good!! 73 Mark K3MSB
On 12/12/07, Mark Lunday, WD4ELG <[EMAIL PROTECTED]> wrote: >>and the SUPERB Dxpedition!!! From [EMAIL PROTECTED] Wed Dec 12 19:36:38 2007 From: [EMAIL PROTECTED] (Mark K3MSB) Date: Wed Dec 12 19:48:33 2007 Subject: [Dx4win] QSL Mailed Value Message-ID: <[EMAIL PROTECTED]> Hello folks -- Just uploaded my LOTW into DX4WIN, with the "Imported QSO sets Upload Confirmed Flag" option. When I do a summary, I noticed that the values in the "QSL Mailed" column are effected (decremented by a few). I thought DX4WIN would change a QSO that was "mailed" to not mailed only if a non-LOTW confirmation was entered. Eh? 73 Mark K3MSB (DX4WIN 7.03.16) From [EMAIL PROTECTED] Wed Dec 12 20:02:14 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Dec 12 20:14:03 2007 Subject: [Dx4win] QSL Mailed Value In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hi Mark, My understanding is that an entity can not be both "mailed" and "confirmed" as far as the Reports are concerned. Since it is confirmed via LoTW, it is no longer considered "mailed". 73 - Jim AD1C --- Mark K3MSB <[EMAIL PROTECTED]> wrote: > Hello folks -- > > Just uploaded my LOTW into DX4WIN, with the "Imported QSO sets Upload > Confirmed Flag" option. > > When I do a summary, I noticed that the values in the "QSL Mailed" > column are effected (decremented by a few). > > I thought DX4WIN would change a QSO that was "mailed" to not mailed > only if a non-LOTW confirmation was entered. -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Thu Dec 13 19:32:18 2007 From: [EMAIL PROTECTED] (Roger Wise) Date: Thu Dec 13 19:45:29 2007 Subject: [Dx4win] No help file Message-ID: <[EMAIL PROTECTED]> Problem is when I go to the help drop down window and click on contents I get an Error message that says Could not get help contents. zero completed successfully.When I try the other option, Search for help on... no response at all. Looks like I do not have the help file at all. Any of you folks out there with the same problem? Thanks for all of your help in advance. Roger
