Nice work, Jim!
Mark Lunday WD4ELG [EMAIL PROTECTED] http://wd4elg.net -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: Friday, December 28, 2007 4:05 PM To: [email protected] Subject: [Dx4win] Able to duplicate country editor problem! Hi Folks, I was able to duplicate the problem with adding FJ to the country database: - I started with the 11 December 2007 country file release - I followed the steps in the application note I wrote: http://dx4win.ad1c.us/appnotes/entity.htm - After saving the country file changes, I opened my log, and sure enough, all QSOs with "K" had been changed to "JZ0" *** But at this point I did NOT save my log! - I then exited DX4WIN completely and restarted the program. This time, all my USA QSOs were correctly logged with the "K" prefix, and all states were left in-tact. The bottom line is, that after editing the country file and saving the changes, you MUST exit DX4WIN complete and restart it. If you open your log immediately after saving the updated country file, without exiting/restarting, your logbook will be corrupt, and if you SAVE this corrupt log, you will potentially lose data, like US states. I hope Paul can duplicate the problem and find a fix! 73 - Jim AD1C -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
