This did it. I never even knew about that check box. Thanks. On 2/5/07, 9K2HN <[EMAIL PROTECTED]> wrote: > Hi, > > This is easy I had the same problem before, go to File > Preferences > > Packet 1 > uncheck the bottom left option which says "Alert > unconfirmed country". > > > and every thing will be fine > > de 9k2hn > Hamad > > > -------- Original Message -------- > > Subject: [Dx4win] Wrong DX Spot Colors > > From: "Kelly Johnson" <[EMAIL PROTECTED]> > > Date: Sun, February 04, 2007 6:43 pm > > To: [email protected] > > > > For the past several weeks I've noticed that DX4WIN is displaying some > > DX spots in the wrong color; in particular, yellow. Right now I am > > looking at my DX Spot window and it is showing FR1GZ and J20RR in > > yellow despite the fact that I've already got J20RR and another FR QSO > > in my log. Neither J2 nor FR are confirmed, but they are both worked > > in my log. In fact, I worked J20RR about 30 minutes ago. The same > > thing was happening a week or so ago with VU7. In spite of the fact > > that I worked VU7RG 2 weeks ago, VU7MY was showing up in yellow. > > > > Anyone know why? Anyone got a fix? I'm running version 6.03. > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win > > From [EMAIL PROTECTED] Mon Feb 5 18:01:04 2007 From: [EMAIL PROTECTED] (wo2n) Date: Mon Feb 5 18:04:14 2007 Subject: [Dx4win] DX4 or computer? Message-ID: <[EMAIL PROTECTED]>
Hi, here's a good one.. I made a batch file on C:\ the hard drive, to backup my save file onto a CD. Every thing seemed FB. Here's the thing, if I start or install the backup CD when DX4 is running, the CD log takes over and added QSO's go to the CD, not the HD? Then when I exit the added QSO are saved to CD automatic, and not the HD. So if I didn't catch this I may loose QSO'S??? QSO's getting separated some went to CD some on HD depending if CD is installed Also, when I do a backup, when I restart DX4 it can't find my log, it looks on the E:\, not the HD. I have to manually open it from file, open. So Question is how to get DX4 to stay with the loaded program off the HD and not look for the CD drive to save when exiting, or running the software. My computer is running XP, and Ver 5.03. CD problem, my batch file is wrong, or DX4 doesn't like it? What I'm doing now is to install the CD and run for backup it after DX4 is shut down, BUT when I restart DX4 after saving logo in the CD, DX4 looks to the CD to start my log on E:\ drive which it don't find so I have to go to file and manually open my log.Hope this makes some sense, hi hi. Thanks for reading. 73, de Bernie/WO2N.>
