--- Wayne King <[EMAIL PROTECTED]> wrote:
> I have DX4WIN 7.02.15 and the Icom 746Pro in not on the list of radios? I
> tried using 746 but it does not work 100%.
Not on list here either. I'll send a note to Paul. Looks like the hex address
for the 746Pro is 66h.
> I can get it to read the frequency but not in real time. I have to click
> on the READ button every time I change freq. Has anyone setup the 746Pro
> with DX4WIN correctly? What are your parameters?
Strange, all ICOM radios should respond to the basic commands. Are you sure
polling is enabled in the preferences? Did you change the 746 pro hex address
to match the 746 (56h)? Try using the 756 hex code instead (50h) and see if it
makes any difference. Can you enable/disable transceive ("babbling") in the
radio?
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Tue Feb 6 15:24:35 2007
From: [EMAIL PROTECTED] (Art - W6KY)
Date: Tue Feb 6 15:27:49 2007
Subject: [Dx4win] Narrow filter problem (IC-756 Pro III)
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
I have also had the same problem with ALL versions of
DX4WIN with my IC-756PRO.. It would be nice if we
could select the filter we want DX4WIN to set or not
set on band change.
Under file|radio there is no option to set filter.
Just Selects narrow filter for CW/SSB in the window,
which it doesn't do. My DSP narrow filter is set to
250hz, medium 500hz and wide 700hz. DX4WIN sets 500hz
every time..Not able to change it in
DX4WIN....Personally, I would rather set my filter by
hand or have a DX4WIN F-key to cycle thru the filters.
Not preset! Band condx/QRM/QRN are going to dictate
filter selection.
73, Art W6KY
--- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote:
> Please reply to reflector or Mikhail directly...
>
>
> Date: Mon, 5 Feb 2007 19:38:58 +0300
> From: Mikhail Bondarev <[EMAIL PROTECTED]>
> Reply-To: Mikhail Bondarev <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: narrow filter problem
>
> Operating CW on 80m and 160m, I like 250Hz filter on
> my IC-756pro3.
> But if I do "grab spot and set radio" on dx cluster
> window, my pro3
> always switched from 250Hz to 500Hz filter and I
> have to select 250Hz
> back by hand. I don't have such problem with
> WriteLog. Any ideas?
>
> Regards, Mike RL3BM
> DX4WIN 7.02.15
>
> --
> Jim Reisert AD1C, 7 Charlemont Court, North
> Chelmsford, MA 01863
> USA +978-251-9933, <[EMAIL PROTECTED]>,
> http://www.ad1c.us
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
