A good solution also is to make a txt file with notepad with the calls like that J41K,01/01/2001,SV1DPI or J41K,,SV1DPI (without date) You can modify easy the daily dx managers or 425dxnews and after that import them I used to do it but now i do something else (and it's much better) I write every new manager or every mistake i want to correct in a piece of paper If i make a qso i write in dx4win also I keep every exception call also in the same paper .. and finally i send an email to Jim AD1C every time he updates the database. When the new release is ready i install this over my old one and i am sure all my corrections are inside and many more. If all of us do the same, we 'll have a perfect database. I check that all is ok with my notes after installation and throw away the paper. Kostas sv1dpi
----- Original Message ----- From: "Jim Reisert AD1C" <[EMAIL PROTECTED]> To: "Art - W6KY" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Friday, January 19, 2007 5:38 AM Subject: Re: [Dx4win] Adding QSL Managers ?? > At 08:03 PM 1/18/2007, Art - W6KY wrote: > >>Am I missing something? Is there a simple 'PopUp' >>window that allows the addition of QSL managers? I >>can't seem to find it after all these years. I have >>actually been adding bogus QSO's with the QSL manager >>and then deleting the QSO's. Leaves the QSL Mgr in the >>database, but kinda (very) clumsy... > > Yup, you missed it, Art! > > File -> Databases -> QSL Managers > > Use control-Insert to add a new manager. > > 73 - Jim AD1C > > p.s. the DX4WIN.CTY file I maintain has an accurate and fairly complete > list of QSL managers going back over 10 years. New ones are added all the > time. If there are old managers that are not in the database or not > correct, send them my way. > > > -- > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 > USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >