Thank you Jim for the reply. I now have a filter selected but when I go to Labels, Set Print Flags, or Mark for QSL, a box comes saying "Setting label field and no QSO filter active." Why is this occuring because I do have an active filter running. When I open my log it only shows the qso's which are in the active filter that I want to print.
thanks john-n4dsp From [EMAIL PROTECTED] Wed Jul 18 12:53:34 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jul 18 13:01:28 2007 Subject: [Dx4win] Cannot mark qsl for print In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- n4dsp <[EMAIL PROTECTED]> wrote: > I now have a filter selected but when I go to > Labels, Set Print Flags, or Mark for QSL, > a box comes saying "Setting label field and > no QSO filter active." I think that means you have no F8 filter active. I guess instead of using a group selection by date, you could have used an F8 filter starting with 1 July 2006. Then you would not have received the warning. 73 - Jim AD1C -- Jim Reisert AD1C, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Wed Jul 18 15:10:07 2007 From: [EMAIL PROTECTED] (n4dsp) Date: Wed Jul 18 15:18:19 2007 Subject: [Dx4win] Printing Selected Group of Labels Message-ID: <[EMAIL PROTECTED]> I have Dx4win User Guide Version 6.03 and on page 73 at the top of the page is titled "Printing a Selected Group of Labels." I have followed these instructions to the T but when I go to Labels/Set Print Flags it does NOT set any qso's in the filter to the 'Y' or ON parameter. Consequently I cannot print any labels. Anyone have any idea what is not taking place? john-n4dsp
