I have found that you lose some of the attributes of the 7000, if you change the address to 50 in the 7000 and run DX4WIN as a 756 the 7000 responds quite well.
Bil W8EB ----- Original Message ----- From: "Dave Earnest" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, June 02, 2007 10:39 AM Subject: [Dx4win] Re: IC-7000 address > With DX4WIN, you will have to use 48h and select the IC-706. That is how I > control my 7000. > > 73, Dave K7JJ > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Friday, June 01, 2007 1:02 AM > Subject: Dx4win Digest, Vol 38, Issue 1 > >> Send Dx4win mailing list submissions to >> [email protected] >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://mailman.qth.net/mailman/listinfo/dx4win >> or, via email, send a message with subject or body 'help' to >> [EMAIL PROTECTED] >> >> You can reach the person managing the list at >> [EMAIL PROTECTED] >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Dx4win digest..." >> >> >> Today's Topics: >> >> 1. Controlling IC-7000 with MicroKeyer (John Desmond) >> 2. RE: Controlling IC-7000 with MicroKeyer (ON4AOI) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Thu, 31 May 2007 23:31:14 -0500 >> From: John Desmond <[EMAIL PROTECTED]> >> Subject: [Dx4win] Controlling IC-7000 with MicroKeyer >> To: [email protected] >> Message-ID: <[EMAIL PROTECTED]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> Hi, >> >> I picked up an IC-7000 at Dayton and was just trying to get it to work >> with DX4WIN. I saw some previous notes regarding changing the address >> to 50h on the rig and then selecting IC-756. That has not worked here >> yet. I also changed the MicroKeyer to IC-756 as well. The MicroKeyer >> seems to see the radio just fine, but I cannot get DX4WIN to control the >> rig yet. >> >> Any ideas? >> >> >> 73, John K0TG >> >> >> >> ------------------------------ >> >> Message: 2 >> Date: Fri, 1 Jun 2007 07:59:39 +0200 >> From: "ON4AOI" <[EMAIL PROTECTED]> >> Subject: RE: [Dx4win] Controlling IC-7000 with MicroKeyer >> To: "'John Desmond'" <[EMAIL PROTECTED]> >> Cc: [email protected] >> Message-ID: <[EMAIL PROTECTED]> >> Content-Type: text/plain; charset="us-ascii" >> >> Hi John, >> Check in the manual if the address 50h is correct >> >> Guy ON4AOI >> >> -----Oorspronkelijk bericht----- >> Van: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] >> Namens John Desmond >> Verzonden: Friday, June 01, 2007 6:31 AM >> Aan: [email protected] >> Onderwerp: [Dx4win] Controlling IC-7000 with MicroKeyer >> >> Hi, >> >> I picked up an IC-7000 at Dayton and was just trying to get it to work >> with DX4WIN. I saw some previous notes regarding changing the address >> to 50h on the rig and then selecting IC-756. That has not worked here >> yet. I also changed the MicroKeyer to IC-756 as well. The MicroKeyer >> seems to see the radio just fine, but I cannot get DX4WIN to control the >> rig yet. >> >> Any ideas? >> >> >> 73, John K0TG >> >> _______________________________________________ >> Dx4win mailing list >> [email protected] >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> >> ------------------------------ >> >> _______________________________________________ >> Dx4win mailing list >> [email protected] >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> End of Dx4win Digest, Vol 38, Issue 1 >> ************************************* >> > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win
