When i receive a direct request and i want to print the answer i am doing this... I change the qsl method to $ i mark the Label to Yes Go to print: Labels>Print qsl labels in the print qsl labels window i choose qsl method instead of all to $. Don't forget to uncheck the print method labels and go to print. If you use a paper with a lot of labels, after the 1st card maybe you need another one tip. Notice that in Print qsl labels window, there is a small window says missing labels. So if you have unstick the 1st labels you will put 1 instead of 0, if you have used 2 labels in past, you 'll put 2 and the printing will start in nr 3 label, etc good luck
Kostas sv1dpi PS By the way i also prefer to use my old cards to reply. These have boxes. But my new cards have not boxes because i print the cards, so the above method is needed.... ----- Original Message ----- From: "Scott Millick" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, March 06, 2007 9:34 PM Subject: [Dx4win] QSL Labels > If you want to print only one label (you got a card and want to send one > back) instead of the ones that you already have marked for printing how do > you do it or can it be done as I do not see this in the manual > > Scotty K9SM > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > >
