I updated the DX4WIN telnet node database on 29 March 2007:
http://dx4win.ad1c.us/cluster.htm
Please read the installation instructions on the web page.
There are many changes but no release notes this time. If a node you use is
not in the list, or stopped working, please let me know so I can fix it.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Thu Mar 29 16:42:54 2007
From: [EMAIL PROTECTED] (Kelly Johnson)
Date: Thu Mar 29 16:46:04 2007
Subject: [Dx4win] Export to LOTW problem
Message-ID: <[EMAIL PROTECTED]>
I tried to export my recent QSOs for upload to LOTW today and had a
problem. Here's what I did:
1) Filtered all QSO's with the UPLOAD flag set to N. This yielded
only about 20 QSOs.
2) Selected "Export to LOTW", selected the file name, etc. It
generated a .ADI file.
I editted the .ADI file and it had no QSOs in it. It had a single
line header at the top of the file but no QSOs. There should have
been about 20 QSOs.
I then went to the standard "Import/Export" menu and exported an ADIF
file there. It generated a .ADI file, but this time it had the 20
QSOs I was expecting. I ended up uploading this to LOTW, but the
upload date didn't get set right. I ended up doing the upload date by
hand, but I still don't understand why the Import/Export menu worked,
but the "Export to LOTW" menu did not. Anyone know?
From [EMAIL PROTECTED] Thu Mar 29 23:24:26 2007
From: [EMAIL PROTECTED] (Kostas sv1dpi)
Date: Thu Mar 29 23:27:42 2007
Subject: [Dx4win] Export to LOTW problem
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Between step1 and step2 add another step 1a like this
1a) In qso window Labels>Set Upload Flags
This menas you must do the N in the Upload flag to Y. Then you will have 20
qsos ready to upload.
Kostas sv1dpi
----- Original Message -----
From: "Kelly Johnson" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, March 30, 2007 12:42 AM
Subject: [Dx4win] Export to LOTW problem
>I tried to export my recent QSOs for upload to LOTW today and had a
> problem. Here's what I did:
> 1) Filtered all QSO's with the UPLOAD flag set to N. This yielded
> only about 20 QSOs.
> 2) Selected "Export to LOTW", selected the file name, etc. It
> generated a .ADI file.
>
> I editted the .ADI file and it had no QSOs in it. It had a single
> line header at the top of the file but no QSOs. There should have
> been about 20 QSOs.
>
> I then went to the standard "Import/Export" menu and exported an ADIF
> file there. It generated a .ADI file, but this time it had the 20
> QSOs I was expecting. I ended up uploading this to LOTW, but the
> upload date didn't get set right. I ended up doing the upload date by
> hand, but I still don't understand why the Import/Export menu worked,
> but the "Export to LOTW" menu did not. Anyone know?
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
