I selected Consolas as my label font (Files -> Prefs -> Rep/lab), but my labels are still being printed with what looks like an Arial font. The label font had previously been set to Courier New, but my labels looked like Arial even then.
Did I do something wrong? 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun May 13 12:18:31 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun May 13 12:27:08 2007 Subject: [Dx4win] 7.03 label font selection broken? Or wrong font type? In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: > I selected Consolas as my label font (Files -> Prefs -> Rep/lab), but my > labels are still being printed with what looks like an Arial font. The > label font had previously been set to Courier New, but my labels looked > like Arial even then. I found it - it's in the label editor, the font was set to Arial. So what exactly *does* the Font selection in the Rep/lab preference do? A couple more questions: - how do I make unconfirmed QSOs print "PSE QSL" and confirmed QSOs print "TKS QSL" on the label? There are three blank lines under "Greeting" in the Rep/lab preferences, but they are otherwise unidentified. - how do I get rid of the "Verified and printed by DX4WIN" tag line on the bottom? 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun May 13 12:28:12 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun May 13 12:37:14 2007 Subject: [Dx4win] 7.03 label font selection broken? Or wrong font type? In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: > --- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: > > > I selected Consolas as my label font (Files -> Prefs -> Rep/lab), but my > > labels are still being printed with what looks like an Arial font. The > > label font had previously been set to Courier New, but my labels looked > > like Arial even then. > > I found it - it's in the label editor, the font was set to Arial. So what > exactly *does* the Font selection in the Rep/lab preference do? It's the font for reports, not for labels. Duh! > A couple more questions: > > - how do I make unconfirmed QSOs print "PSE QSL" and confirmed QSOs print > "TKS > QSL" on the label? There are three blank lines under "Greeting" in the > Rep/lab > preferences, but they are otherwise unidentified. Read the help text - @@ does it. > - how do I get rid of the "Verified and printed by DX4WIN" tag line on the > bottom? Turn off "advertisement". I should learn to read better. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun May 13 12:35:41 2007 From: [EMAIL PROTECTED] (KR4DA) Date: Sun May 13 12:44:19 2007 Subject: [Dx4win] Dx4win and FT-2000 Message-ID: <[EMAIL PROTECTED]> Hi Reno, and anyone else.................. YOU WROTE: Neil, the rig file V8-i in the latest version of DX4WIN, V7.03 seems to work very well. It appears to correct the faults that many of us have found and lived with. It sets the correct modes now in both vfo's, sets splits and enables the VFO-B to xmit and picks up the vfo- B xmit frequency and sents it to the packetcluster when you send a spot out. I have tried it with both V7.03 and V7.02 versions of DX4Win. PLEASE DO THIS LITTLE TEST BELOW Dx4win 7.03.16 rig file V8-i Would you please try this so I won't think I am nuts. To be honest I HOPE I AM nuts. Click QSO> add real time enter a call TE1ST use A=14080 qsx B=14090 and mode RTTY press split button TX on VFO B Now in DX4WIN do a ANN DX or a ALT+A Look at the FREQ and QSX FREQ ARE THEY REVERSED?????????????????????? My ANN DX will reverse the A and B VFO freqs. VFO A on radio is 14080 but the ANN DX window showes FREQ 14090 and the QSX freq should be VFO B on radio as 14090 but the QSX freq showes in the ANN DX window 14080. This NEW rig file is a HUGE/big improvement on setting MODES from the SPOT window. SPLIT, SETS, MODE, ETC ALL LOOK GOOD NOW. I believe they are aware of the issue I just asked you to test. -- de KR4DA Bob Middleburg, FL HK0/KR4DA J79DA FG/KR4DA
