On 11/26/2007 3:51 AM, n4dsp wrote: > I am running version 7.02.15 and have some questions on some labels. > > In the QSO window/Reports/DXCC/Summary for 80 meters I have the > following info and not quite sure what these mean: > > 80m Worked Labels QSL Mailed Submit Total > 10 50 31 5 96 > > Someone please explain what this is telling me? > Thanks
You are missing some columns (like Confirmed). You've worked a total of 96 entities on 80 meters. Of those 96 (working from right to left): 5 are confirmed and marked as submitted 31 are mailed but not yet confirmed (i.e. QSL date is non-zero) 50 are marked to have labels printed (QSL date is zero) 10 are worked but have not been been mailed or marked for label --- 96 This should all be explained in the program help. -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Thu Nov 29 14:39:31 2007 From: [EMAIL PROTECTED] (Franz Nieberding) Date: Thu Nov 29 14:50:26 2007 Subject: [Dx4win] Export of 2007-contact as adif-files Message-ID: <[EMAIL PROTECTED]> Hi Fellows, I wish to export my 2007-contacts as adif-file, but I could not find out how. I filtered the contacts and tried to export them from the logbook window, but only ASCII is possible. And no way to import the ascii file into a new dx4win-file. Does anybody have a solution? Tnx es 73s de Franz, DK1II __________________________________ Ihre erste Baustelle? Wissenswertes f?r Bastler und Hobby Handwerker. www.yahoo.de/clever From [EMAIL PROTECTED] Thu Nov 29 15:20:09 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Thu Nov 29 15:30:38 2007 Subject: [Dx4win] Export of 2007-contact as adif-files In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> --- Franz Nieberding <[EMAIL PROTECTED]> wrote: > Hi Fellows, > I wish to export my 2007-contacts as adif-file, but I > could not find out how. I filtered the contacts and > tried to export them from the logbook window, but only > ASCII is possible. In the main DX4WIN window (the one that says, "DX4WIN n.n.n <call> <name>"): File -> Import/Export A new window should come up, with ADIF as the first line, and selected. Then in that window: File -> Export 73 - Jim AD1C -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Thu Nov 29 15:44:40 2007 From: [EMAIL PROTECTED] (Franz Nieberding) Date: Thu Nov 29 15:55:08 2007 Subject: [Dx4win] Export of 2007-contact as adif-files In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Jim, thanks for the advise. I have 26 000 contacts in my log, and I would like to extract the few contacts done in 2007 and put them into a new file. How can I do that? 73s Franz --- Jim Reisert AD1C <[EMAIL PROTECTED]> schrieb: > --- Franz Nieberding <[EMAIL PROTECTED]> wrote: > > > Hi Fellows, > > I wish to export my 2007-contacts as adif-file, > but I > > could not find out how. I filtered the contacts > and > > tried to export them from the logbook window, but > only > > ASCII is possible. > > In the main DX4WIN window (the one that says, > "DX4WIN n.n.n <call> <name>"): > > File -> Import/Export > > A new window should come up, with ADIF as the first > line, and selected. Then > in that window: > > File -> Export > > 73 - Jim AD1C > > > -- > Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, > http://www.ad1c.us > __________________________________ Ihr erstes Fernweh? Wo gibt es den sch?nsten Strand? www.yahoo.de/clever From [EMAIL PROTECTED] Thu Nov 29 15:45:48 2007 From: [EMAIL PROTECTED] (Victor West) Date: Thu Nov 29 15:56:18 2007 Subject: [Dx4win] FT-950 and DX4WIN Message-ID: <[EMAIL PROTECTED]> I decided to upgrade radios to the FT-950 because of its additional features, and ordered a FT-950. While awaiting the 950, I looked at the CAT manual on line, and compared it to the FT-9000 CAT manual, and they seemed very similar. Most of the 950's commands were also in the 9000 manual. After my new radio arrived today, one of the first things I tried was the FT-9000 radio driver in DX4WIN to see if the program would function fully with the FT-950. As of now, the program appears to be fully functional with the FT-950. (using the FT-9000-v31 driver in the program.) If you find any glitches please let me know. de Vic, N5YY ex AE5DX
