Scot, Many years ago I was also using KAM and KAM+. I used a crossed ellipses display on a monitorscope for easy tuning and was quite happy.
Later I was running KAM+ in parallel with PTC-II and found that PTC-II was one step ahead in reception of weak signals. But the spectrum tuning display on a row of LEDs is not so convenient. Now I have MMTTY via MicroKeyer in parallel with PTC-II. Weak signal performance is about equal but MMTTY is very flexible and so comfortable to use, especially for logging with DX4WIN. I am still keeping PTC-II for Pactor and AMTOR, but for RTTY it will be MMTTY. 73, Kjell, PB3SM - SM6CPI > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Ing. > Milo? Prosteck? > Sent: 03 October 2007 10:55 > To: [email protected] > Subject: [Dx4win] Re:What does other people use? > > Dear Scot: > > Very good is to use microHAM USB micro KEYER as an interface > between PC and Rig with MMTTY. It is possible to use him for > FSK keying. > > 73, Milos, OK1MP > > > > I was wondering what other people were using on RTTY. I have > DX4WIN 7.02.15 and started playing around with the MTTY > function this morning. The rig I am using is a Icom 781 with > CI-V level convertor and DX4WIN is controlling it. > > I talked to West Mountain Radio this morning and he was very > vag on the computer sizing for his equipment since he's only > a equipment manufacture. > > For years I used the Kantronics KAM until it bit the dust. > > Let me know off the reflector > > Thanks > Scott Augsburger > wr0u > > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.488 / Virus Database: 269.13.39/1045 - Release > Date: 2.10.2007 > 18:43 > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
