--- F6EXV <[EMAIL PROTECTED]> wrote:
> Trying to configure the just received MicroHam USB II with DX4Win... and
> of course nothing works !!!!
> Using a FT1000MP Mark V, DX4Win version 7.01, MMTTY version 1.65D and
> Windows XP.
Hi Paul,
I'd start with the radio first. You should be able to create a virtual COM
port using the microHam software, then use that COM port in DX4WIN as your
radio COM port. If I recall, Yaesu is 4800 baud, 2 stop bits. I don't know if
the stop bits are configured in the microHam router program, or in DX4WIn.
Then try MMTTY stand-alone, and try to get FSK and PTT working through those
virtual COM ports.
The people on the microHam reflector (esp. Joe W4TV) are pretty helpful in
answering questions:
http://groups.yahoo.com/group/microHAM/
Good luck.
- Jim
--
Jim Reisert AD1C/0, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Mon Oct 22 16:42:10 2007
From: [EMAIL PROTECTED] (Dave Sharred)
Date: Mon Oct 22 16:48:46 2007
Subject: [Dx4win] MicroHam USB II
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Jim
I spoke with Paul tonight; since I use USB II and an MP ok with DX4WIN.
I am not aware of any different settings with MP's or MK V's.
You are right; it is 4800 Baud and 8N2 for an MP; and we configured the COM
ports exactly as mine.
The Baud rate is set in DX4WIN, under radio option (preferences); and it is
only the COM port that is aligned in the USB window.
I remembered from my CT days that there was a switch on the back of MP's,
that reset the CAT settings out of the MP; since sometimes they were
reported as going screwy.
I couldn't sort it unfortunately; and is a mystery unless there is a
hardware fault, I suspect (cables, ports, USBII, rig o/p) or something is
different with the MK V
Hope you got your MD4K card back OK; look out for us this weekend, this time
from P3F !
73
Dave
G3NKC
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Reisert AD1C
Sent: 22 October 2007 21:15
To: [EMAIL PROTECTED]; DX4WIN Reflector
Subject: Re: [Dx4win] MicroHam USB II
--- F6EXV <[EMAIL PROTECTED]> wrote:
> Trying to configure the just received MicroHam USB II with DX4Win... and
> of course nothing works !!!!
> Using a FT1000MP Mark V, DX4Win version 7.01, MMTTY version 1.65D and
> Windows XP.
Hi Paul,
I'd start with the radio first. You should be able to create a virtual COM
port using the microHam software, then use that COM port in DX4WIN as your
radio COM port. If I recall, Yaesu is 4800 baud, 2 stop bits. I don't know
if
the stop bits are configured in the microHam router program, or in DX4WIn.
Then try MMTTY stand-alone, and try to get FSK and PTT working through those
virtual COM ports.
The people on the microHam reflector (esp. Joe W4TV) are pretty helpful in
answering questions:
http://groups.yahoo.com/group/microHAM/
Good luck.
- Jim
--
Jim Reisert AD1C/0, <[EMAIL PROTECTED]>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win
