> 2) I operate primarily mobile. Although I want my log to be for all my > N3AHA contacts including fixed and portable, I would like to have mailing > lable say N3AHA/M vice N3AHA. Is it possiblel to set that up. I would also > like to specify my county location, so the county would print out with my > labels. Is that possible?
You can use group numbers to keep groups of QSOs associated with each other. DX4WIN is limited to 253 groups (groups 0, 254 and 255 are special and reserved). You could assign a unique group number to each county you operated FROM, given the limitation above. The Group Name (associated with the number) could be the ST,County name, and you can print that on QSL labels. 73 - Jim AD1C -- Jim Reisert AD1C/0, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Tue Sep 25 09:31:53 2007 From: [EMAIL PROTECTED] (Steve GW4BLE) Date: Tue Sep 25 09:37:21 2007 Subject: [Dx4win] MMTTY In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Rein, As you are using an FT2000 you really need an up-to-date driver from DX4WIN for it to interface correctly with your rig. There are problems with the currently available driver which can cause problems. I have emailed DX4WIN support and hope that the issue will soon be resolved. You may wish to do the same. 73 Steve GW4BLE -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rien Sent: 25 September 2007 06:06 To: [email protected] Subject: [Dx4win] MMTTY Hello to all Is there some one who work with MTTY and DX4Win ? I try but it will not work here I using a FT-2000 and a rigblaster Hope there is some one have the same configuration and work with this Tnx 73" Rien, PA7RA _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
