On 2/17/2008 7:56 PM, Glen and Pam wrote:
> I will ask again....IS there a way to make this logging
> program write to the hard after each contact?
You can type ALT-S after each QSO. Saving to disk does not happen
automatically.
If you have a crash, there MAY BE a way to recover your log. I wrote an
extensive note on this, see:
http://dx4win.ad1c.us/appnotes/backup.htm
It's best to check BEFORE re-starting DX4WIN after the crash.
73 - Jim AD1C
--
Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED] Mon Feb 18 02:34:29 2008
From: [EMAIL PROTECTED] (Dave Sharred)
Date: Mon Feb 18 02:40:35 2008
Subject: [Dx4win] Lost power....lost QSO's
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
I am in a rush for work; but you can also change the time interval for auto
save, I believe.
You should check that this is set for not too long (can't remember what the
default is)
73
Dave
G3NKC
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Reisert AD1C
Sent: 18 February 2008 05:56
To: Glen and Pam
Cc: DX4WIN
Subject: Re: [Dx4win] Lost power....lost QSO's
On 2/17/2008 7:56 PM, Glen and Pam wrote:
> I will ask again....IS there a way to make this logging
> program write to the hard after each contact?
You can type ALT-S after each QSO. Saving to disk does not happen
automatically.
If you have a crash, there MAY BE a way to recover your log. I wrote an
extensive note on this, see:
http://dx4win.ad1c.us/appnotes/backup.htm
It's best to check BEFORE re-starting DX4WIN after the crash.
73 - Jim AD1C
--
Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win
