Hi Marcelo, You are not the first to have this problem. Something is wrong on the ARRL server.
Maybe Paul can put in a work-around in the next version. 73 - Jim AD1C --- [EMAIL PROTECTED] wrote: > I?ve found a unusual behavior in DX4WIN LoTW import. > > For some reason, I have some 5.000 QSOs in LoTW that are marked as <PHONE> in > the mode. > (They are from a WPX contest my computer went dead, and I logged per hand... > later on I used a software called cabrillotools to generate the log). > > LoTW treats these QSOs normally, and issues credits correctly. The > lotwreport.adi lines come as follows: > > <APP_LoTW_OWNCALL:5>PY1KN > <STATION_CALLSIGN:5>PY1KN > <CALL:4>K9DJ > <BAND:3>15M > <MODE:5>PHONE > <QSO_DATE:8>20050326 > <TIME_ON:6>235800 > <QSL_RCVD:1>Y > <QSLRDATE:8>20080201 > <DXCC:3>291 > <CQZ:1>4 > <ITUZ:1>8 > <GRIDSQUARE:6>EN54wn > <STATE:2>WI > <CNTY:8>WI,BROWN > <eor> > > When I import this into DX4WIN, I get the error file: > > The following QSOs were not found in the log, > but they were flagged as confirmed in the imported log. > K9DJ 26-Mar-2005 23:58 15m CW > ...... > > I found out, by making some tests, that <MODE:5>PHONE is somehow translated > as CW (my default mode in DX4WIN). > > I solve this by making a global Search&Replace in the file, 5:>PHONE to > 3:>SSB every time I import the report back into LOTW. > > But maybe others my stumble into the same problems. > > Thanks for all the help > > Marcelo, PY1KN -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri Feb 1 14:40:40 2008 From: [EMAIL PROTECTED] (Ron Stone) Date: Fri Feb 1 14:44:37 2008 Subject: [Dx4win] Help with Digi Keyer + DX4win Set up Message-ID: <[EMAIL PROTECTED]> I'm transitioning to DIGI KEYER but can not seem to set up DX4Win...any advice or help would be appreciated.' Thanks de Ron, N3AF From [EMAIL PROTECTED] Fri Feb 1 16:27:26 2008 From: [EMAIL PROTECTED] (AC0W) Date: Fri Feb 1 16:30:55 2008 Subject: [Dx4win] Re: LOTW Import Message-ID: <[EMAIL PROTECTED]> I had this problem and discovered the problem was with my file that I sent in and not LOTW. I used a cabrillo file from a contest to generate the file to upload. Well the cabrillo file had as mode PHONE. So this followed all the way through and was accepted by LOTW. When I did the report of course it came back as PHONE versus in DX4WIN I had those QSO properly identified as SSB. I had to export that group of Q's from DX4WIN, do the TQSL thing and then upload to LOTW server. Now maybe LOTW should not accept contacts sent in that list the mode as PHONE. For now LOTW considers PHONE any of the possible PHONE modes and it will match to contacts from other people listing SSB, FM, AM, etc at the mode. Bill AC0W ---- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: Hi Marcelo, You are not the first to have this problem. Something is wrong on the ARRL server. Maybe Paul can put in a work-around in the next version. 73 - Jim AD1C --- [EMAIL PROTECTED] wrote: > I?ve found a unusual behavior in DX4WIN LoTW import. > > For some reason, I have some 5.000 QSOs in LoTW that are marked as <PHONE> in > the mode. > (They are from a WPX contest my computer went dead, and I logged per hand... > later on I used a software called cabrillotools to generate the log). > > LoTW treats these QSOs normally, and issues credits correctly. The > lotwreport.adi lines come as follows: > > <APP_LoTW_OWNCALL:5>PY1KN > <STATION_CALLSIGN:5>PY1KN > <CALL:4>K9DJ > <BAND:3>15M > <MODE:5>PHONE > <QSO_DATE:8>20050326 > <TIME_ON:6>235800 > <QSL_RCVD:1>Y > <QSLRDATE:8>20080201 > <DXCC:3>291 > <CQZ:1>4 > <ITUZ:1>8 > <GRIDSQUARE:6>EN54wn > <STATE:2>WI > <CNTY:8>WI,BROWN > <eor> > > When I import this into DX4WIN, I get the error file: > > The following QSOs were not found in the log, > but they were flagged as confirmed in the imported log. > K9DJ 26-Mar-2005 23:58 15m CW > ...... > > I found out, by making some tests, that <MODE:5>PHONE is somehow translated > as CW (my default mode in DX4WIN). > > I solve this by making a global Search&Replace in the file, 5:>PHONE to > 3:>SSB every time I import the report back into LOTW. > > But maybe others my stumble into the same problems. > > Thanks for all the help > > Marcelo, PY1KN -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Sat Feb 2 02:38:22 2008 From: [EMAIL PROTECTED] (Vanderydt Theo) Date: Sat Feb 2 02:40:37 2008 Subject: [Dx4win] Valid DXCC question ? Message-ID: <[EMAIL PROTECTED]> Hi all, I keep seperate logs for different calls i use or have used in the past. I assigned a different group number to each one of them for the well know reasons. Now when i merge two logs i notice the "VALID DX" box changes all merged records into "INVALID". This means when a QSO from the merged log is a new worked DXCC it does not show in my DXCC records. Why does it change the original setting ? Is there a way to keep the setting the same even after the merge ? Am i overlooking something ? Do i need to modify the filter ? Is it a bug ? Any help or suggestions are most welcome ! Tks, es cul de ON4ATW Theo. [EMAIL PROTECTED]
