I will add that i have not find a way (i believe dx4win doesn't support right) to use the ptt of the keyer with my markv. Not big problem on cw as i activate the vox, but big one on mmtty where i use another interface just for it. By the way writelog does it fine...
In your question now. I believe that if you change this situation inside windows you will solve the problem. Start>control panel>system>device manager>ports rename com5 to com11 and com11 to com5. Windows will tell you that it is problem but i have done it with no problem. If it doesn't work make the reverse. I don't think you loose something. My opinion, your risk Kostas sv1dpi ----- Original Message ----- From: "Steve Jackson" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, January 05, 2008 8:26 PM Subject: [Dx4win] support for COM ports above COM8 > I have a new K1EL Winkeyer USB on COM11. ( Plug for the gizmo: This is a > nice kit and went together without a hitch in just a couple of hours. > Price is right, too.) > > To get the feature support > for this recent addition to my station, I just placed an order for the > upgrade from > 6.04 to 7.03 on the DX4WIN web site. > > It would be rather challenging ... as in, not really possible ... to > reconfigure this new WinKeyer to a lower COM port designation. > > I have > two hardware UART COM ports on COM1 and COM2 (which can't be moved), and > then a Digi USB-serial box on COM 2 through COM10, inclusive. Also fixed. > > It looks like DX4WIN V7.03 only supports COM ports up to COM8. > > How can I get my Winkeyer to operate with DX4WIN V7.03? > > > > > > ____________________________________________________________________________________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > >
