Walt, Notes can be added if you edit the rigfile in the database But if you don't know how to do it be carefull.
The CW filter setting can be changed with a text editor Open your rigfile with textpad or similar program The number before FD is used for CW.... BUT this also changes the SSB-RTTY filter settings CW 1 = 1.2 Khz 2 = 500 hz 3 = 250 hz This is the command [RC-Set Mode] CSTR=060002FD Guy ON4AOI -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens K2WK Verzonden: Tuesday, January 22, 2008 7:50 PM Aan: [email protected] Onderwerp: [Dx4win] Rig files... more questions. Hey all, I was wondering what the meaning of some of the parameters are that make up the rig files, most specifically for the IC-756 Pro III. Some of them are quite self-explanatory, it's the others that puzzle me. Here's my brief list: 1) "NOTES=Selects narrow filter for CW/SSB." How is this done, i.e. what command is sent to the rig and how does that work? Personally, I'd like the rig to go to the Wide CW Filter. How and where do I change this in the rig file or how do I send a CI-V command to accomplish same? 2) RMUL= 1.00000000000000E+0000 and WMUL= 1.00000000000000E+0000 What are these multipliers? 3) RITSCL= 1.00000000000000E+0000 Hmmm, what does this do? I have access to the CI-V command set, but have never tried sending commands to the radio, any suggestions? 73 de Walt - K2WK _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
