OK, I just worked 9M6/N1UR.... DX4Win shows East Malaysia (9m5), I know he is on Spratly Island (1S). I am guessing there will be an add on for the next country file or did I miss one?
Will WC2L From [EMAIL PROTECTED] Sun Mar 23 09:23:35 2008 From: [EMAIL PROTECTED] (Howard Dickson) Date: Sun Mar 23 09:29:57 2008 Subject: [Dx4win] Network Version of DX4Win Message-ID: <[EMAIL PROTECTED]> Our Club has just moved into new facilities and we have established three operating positions with computers at each position and they are all networked to a central server. We want to used DX4Win but but the programme does not seem to want to work from a central server. Is there a server-friendly version of DX4Win, or is there some trick required to get the program to operate in this way. Any help would be appreciated. Howard - VE1DHD Halifax Amateur Radio Club From [EMAIL PROTECTED] Sun Mar 23 10:07:30 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Mar 23 10:14:03 2008 Subject: [Dx4win] 9M6 In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> On 3/23/2008 8:11 AM, William Liporace - WC2L wrote: > OK, I just worked 9M6/N1UR.... DX4Win shows East Malaysia (9m5), I know he is > on Spratly Island (1S). I am guessing there will be an add on for the next > country file or did I miss one? Already released: http://www.country-files.com/dx4win/history.htm#47 -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun Mar 23 10:15:11 2008 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Sun Mar 23 10:21:51 2008 Subject: [Dx4win] Set up QRP log In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Hi Dave, Don't assign a group number to QRP QSOs. Just check the QRP box. I think it automatically becomes group number 254 or 255. F8 filters do not affect DXCC status. You must create a Group Filter (See Filter -> Selection), name it QRP (or something else), check the QRP box at the bottom, then update and save. DX4WIN clears ALL filters when you re-open the log. All you need to do then is Filter -> Selection, pick your QRP filter name from the drop-down box at the top, then OK. 73 - Jim AD1C On 3/23/2008 8:10 AM, David M. Monfried wrote: > Going slightly nuts here trying to set up a separate log just for QRP. I > have 431 QRP Q's, a small subset of the entire log. > > All QRP log entries are marked with both the QRP box set to "Y" and with > "Group" showing the number 1. > > The objective is to track my DXCC and band/mode/country status just for > DXCC. > > When I select Filter (F8) and sort by either QRP or Group 1, up pops the > correct info (although the band/mode/country status in the "Country" window > shows status for the entire log, not just the QRP subset). > > The problem is can save the log (via File/Save As/W2PK QRP.dxl), but when I > open that newly-saved file, I get the entire log, not just the QRP subset. > > I'm certain that I'm overlooking something very basic and simple...but > cannot figure out what it might be. > > Any help would be appreciated. > > Tnx. > > 73, > Dave, W2PK -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Sun Mar 23 10:25:46 2008 From: [EMAIL PROTECTED] (David M. Monfried) Date: Sun Mar 23 10:32:09 2008 Subject: [Dx4win] Set up QRP log In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Perfect, Jim. Thanks very much. Dave, W2PK -----Original Message----- From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Sent: Sunday, March 23, 2008 8:15 AM To: David M. Monfried Cc: [email protected] Subject: Re: [Dx4win] Set up QRP log Hi Dave, Don't assign a group number to QRP QSOs. Just check the QRP box. I think it automatically becomes group number 254 or 255. F8 filters do not affect DXCC status. You must create a Group Filter (See Filter -> Selection), name it QRP (or something else), check the QRP box at the bottom, then update and save. DX4WIN clears ALL filters when you re-open the log. All you need to do then is Filter -> Selection, pick your QRP filter name from the drop-down box at the top, then OK. 73 - Jim AD1C On 3/23/2008 8:10 AM, David M. Monfried wrote: > Going slightly nuts here trying to set up a separate log just for QRP. > I have 431 QRP Q's, a small subset of the entire log. > > All QRP log entries are marked with both the QRP box set to "Y" and > with "Group" showing the number 1. > > The objective is to track my DXCC and band/mode/country status just > for DXCC. > > When I select Filter (F8) and sort by either QRP or Group 1, up pops > the correct info (although the band/mode/country status in the > "Country" window shows status for the entire log, not just the QRP subset). > > The problem is can save the log (via File/Save As/W2PK QRP.dxl), but > when I open that newly-saved file, I get the entire log, not just the QRP subset. > > I'm certain that I'm overlooking something very basic and simple...but > cannot figure out what it might be. > > Any help would be appreciated. > > Tnx. > > 73, > Dave, W2PK -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us
