The new .rig file doesn't work with my 756 Pro III. The original one
works just fine, and that's the one I'm using.
Paul created this file for one particular user. I don't know that that
there are two different versions of 756 pro firmware, I have had the 756
(original) and 756 Pro (I) and all used the same .RIG file as the Pro
(III) I have now. I suspect this particular user (who needed the _B
file) had something else set up incorrectly, but those are baseless
accusations on my part without any hard evidence.
> For the time being I am using the old rig file (but one has to check the
> frequency before spotting or logging it - sometimes it is garbled).
Are you using a USB radio interface (like microHam)? That's been the
source of my problems in the past. I didn't seem to have any problems
recently using 7.05 and the latest microHam firmware (7.1.5). But I
didn't get a lot of testing in (i.e. I've only logged about 50 QSOs and
put out a few spots).
If I can get a real antenna up this weekend, and get back on the air,
I'll have more time to play around.
73 - Jim AD1C
On 9/13/2008 2:27 AM, Erkki Heikkinen wrote:
Version notes: "Frequency field for Icom 756 Pro III was too wide" (v.
7.05.03).
The new rig file seems to be called ICOM 756 Pro III_B (there are two
rig files for Pro III now). The only difference to the earlier one I
found is the field [RF-Current VFO] where the new file now has POS=5
(instead of POS=6) and LM=4 (instead of LM=5).
The new rig file works OK when you click a spot, but if you choose
"Return to last freq" the results are very strange - sometimes outside
of ham bands.
For the time being I am using the old rig file (but one has to check the
frequency before spotting or logging it - sometimes it is garbled).
Anyone with ideas how to get the Pro III_B rig file to return the radio
to the previous frequency correctly?
73 Erkki OH2BF
--
Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win
