Feedback, I just got 404 003.00 instead of correct one 14 040.03... But it does not happen as often as with 9600 baud rate...
Erkki OH2BF > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Erkki Heikkinen > Sent: Monday, September 15, 2008 3:39 PM > To: 'Steve Tobe'; 'Jim Reisert AD1C' > Cc: [email protected] > Subject: RE: [Dx4win] Icom 756 Pro II rig file > > > Steve, > > Thank you very much for this. I changed my Pro III baud rate > also to 19200 and now the occasional garbled frequency > readings seem to be a case of history! > > 73 Erkki OH2BF > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Steve Tobe > > Sent: Monday, September 15, 2008 2:15 PM > > To: Jim Reisert AD1C > > Cc: [email protected] > > Subject: Re: [Dx4win] Icom 756 Pro II rig file > > > > > > jim: > > > > i am using a usb interface for dx4win. but i have found a fix > > for the problem, through experimentation. i just changed my > > baud rate to 19200 on the 756 pro II (and of course in > > dx4win--you must uncheck the 'default' box) and all works fine now. > > > > thanks for your suggestions. > > > > 73 > > > > steve VE3XO > > > > > > On Sun, Sep 14, 2008 at 11:35 AM, Jim Reisert AD1C > > <[EMAIL PROTECTED]> wrote: > > > Are you using a COM port or USB interface? I *sometimes* see that > > > problem using a USB interface, but it doesn't always happen. > > > > > > Make the changes described in Erkki's E-mail to the: > > > > > > ICOM 756 Pro II.rig > > > > > > file in the dx4w7xx/radios directory and see if it fixes > > your problem. > > > The changes start around line 99 in the file: > > > > > > 99,100c99,100 > > > < POS=6 > > > < LM=5 > > > --- > > > > POS=5 > > > > LM=4 > > > > > > You should NOT be running DX4WIN while making this change! > > > > > > 73 - Jim AD1C > > > > > > On 9/14/2008 4:58 AM, Steve Tobe wrote: > > >> > > >> The recent discussion on the Icom 756 Pro III has raised another > > >> question for me. I have an Icom 756 Pro II and in dx4win, > > two extra > > >> digits are consistently added to the frequency--e.g. 14.070.00 > > >> becomes 1407,000.00. Anyone know of a fix for this? It > can be very > > >> annoying! > > >> > > >> Thanks and 73. > > >> > > >> steve VE3XO > > >> > > >> > > >> > > >> On Sat, Sep 13, 2008 at 4:27 AM, Erkki Heikkinen > > >> <[EMAIL PROTECTED]> wrote: > > >>> > > >>> Version notes: "Frequency field for Icom 756 Pro III was > > too wide" > > >>> (v. 7.05.03). > > >>> > > >>> The new rig file seems to be called ICOM 756 Pro III_B > (there are > > >>> two rig files for Pro III now). The only difference to > > the earlier > > >>> one I found is the field [RF-Current VFO] where the new > > file now has > > >>> POS=5 (instead of POS=6) and LM=4 (instead of LM=5). > > >>> > > >>> The new rig file works OK when you click a spot, but if > > you choose > > >>> "Return to last freq" the results are very strange - sometimes > > >>> outside of ham bands. > > >>> > > >>> For the time being I am using the old rig file (but one > > has to check > > >>> the frequency before spotting or logging it - sometimes it is > > >>> garbled). > > >>> > > >>> Anyone with ideas how to get the Pro III_B rig file to > return the > > >>> radio to the previous frequency correctly? > > >>> > > >>> 73 Erkki OH2BF > > > > > > -- > > > Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us > > > > > > > > > > > -- > > ---------------------- > > Professor Stephen S. Tobe, FRSC > > Department of Cell and Systems Biology > > University of Toronto > > 25 Harbord Street > > Toronto, ON M5S 3G5 > > Canada. > > > > Phone: 416-978-3517 > > FAX: 416-978-3522 > > > > email: [EMAIL PROTECTED] > > > > homepage: http://www.zoo.utoronto.ca/tobeweb > > ----------------------- > > _______________________________________________ > > Dx4win mailing list > > [email protected] > http://mailman.qth.net/mailman/listi> nfo/dx4win > > > > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
