Sorry, I missed the part of not working with 7.05.03. I am still using
the last version. I will wait to update after some of the bugs (like
this one) are ironed out.
_______________________________________________________
----- Original Message -----
From: "Alan Zack" <[EMAIL PROTECTED]>
To: "Jim Reisert AD1C" <[EMAIL PROTECTED]>; "DX4WIN"
<dx4win@mailman.qth.net>
Sent: Monday, September 22, 2008 3:03 PM
Subject: Re: [Dx4win] 7.05.03 not printing group names on labels?
Jim, et all,
Under PREFERENCES > RPT/LAB
In the GREETINGS box I have
@@ %% 73 (no dashes as you show, the spacing between the
marks can be adjusted to fit your label size for proper fit, for
example, if the 73 runs off the end of the label you have to shorten
the spacing)
Then when I print a label it will say:
PSE QSL 2007 CQWWDXCW 73
-------- OR -------------
TNX QSL 2008 ARRLDXSSB 73
etc, etc, etc, depending on the GROUP number of the QSO and if the
CNFM box is marked Y or N.
I have a different GROUP number assigned for each major contest I log.
I work the contest using CTWin, use your instructions to convert CTWin
to ADIF, then import the CTWin ADIF file to DX4WIN. Before doing so I
must assign a new GROUP number for that contest that I am about to
import and reset my PREFERENCE > QSO > GROUP window to that individual
GROUP number. After doing the import all the QSO's just imported from
that particular CTWin ADIF contest file will have that GROUP number
assigned. After a successful contest log import I must go back to
PREFERENCE > QSO > GROUP window and change the GROUP number back to
what I use for everyday normal non contest QSO's. In my personal
situation that is GROUP 100 (K7ACZ) and when I print a label from a
QSO made under GROUP 100 the label will just say K7ACZ. Example:
TNX QSL K7ACZ 73.
When I print labels I ALWAYS at the PRINT QSL LABEL window click on
PRINT. Then when the REPORT SETUP Window pops up, at the DESTINATION
box I select PREVIEW to see how the label will look before printing.
Hope this helps. I learned most of this from the Manual, help files,
trial and error, and all the help and tips you have provided over the
years.
_______________________________________________________
Alan Zack
Amateur Radio Station K7ACZ
Official USCG Auxiliary Comm Station
Las Vegas, Nevada, USA
Delta Rocket Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
U.S. Coast Guard, Always Ready, Always There
Every hour, Every day, Around the Clock and Around the World
SEMPER PARATUS
http://www.geocities.com/k7acz
http://gocoastguard.com
http://www.uscgradio.net
http://www.comm-one.org
-------------------------------------------------------------------------------------------
----- Original Message -----
From: "Jim Reisert AD1C" <[EMAIL PROTECTED]>
To: "DX4WIN" <dx4win@mailman.qth.net>
Sent: Monday, September 22, 2008 2:18 PM
Subject: [Dx4win] 7.05.03 not printing group names on labels?
I thought I would try what group names on labels look like. But I
don't think it's working.
In my Rep/Lab preferences I have:
%% - @@ - 73 de Jim AD1C
The help text says, "A %% (two percent characters) will be replaced by
the group name that
corresponds to the group number for the QSO printed."
Yet when I print (preview) the labels, all I see is this:
- Pse QSL - 73 de Jim AD1C
I know the QSOs have group numbers!
Can anyone else confirm this? Did I miss a step?
73 - Jim AD1C
--
Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win