After 3 days of pulling my hair out I have solved the problem. The problem was in the MMTTY keying setup window (ALT S in the MMTTY window). With MMTTY using COM 1 for FSK the MMTTY keying setup cannot be set to COM 1 also. When running in the FSK mode the keying setup is irrelevant and should not matter, but it does. How the keying got set to COM 1 for v704 & 705 only I do not know. Thanks to those who had suggestions.
--- On Fri, 10/17/08, Mike Rhodes <[EMAIL PROTECTED]> wrote: From: Mike Rhodes <[EMAIL PROTECTED]> Subject: Re: [Dx4win] MMTTY w/704 & 705 To: [email protected] Date: Friday, October 17, 2008, 6:08 AM I know it seems terribly obvious but have you rebooted lately? You might even have to go as far as physically dropping power to your PC. Good Luck, Mike / W8DN ************ DAVID DERAIN wrote: > I am having a MMTTY problem with v704 & v705. I have had to go back > to v702 where everything works fine. I have also tried this on my > back-up computer with the same results. > > PROBLEM: When using the RTTY macros I get an "ie Open - device already > open" error. > > I am running RTTY FSK using COM 1 (A real COM Port, no USB to COM > converter) > Has anyone else seen this problem. > > ------------------------------------------------------------------------ > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
_______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
